Limited record: this part has neither specifications nor a datasheet in the catalog yet. It is shown for reference and is not indexed.

SUP-P302-B – Anti-corrosion 4-20 mA and RS485 pressure transmitter

Anti-corrosion 4-20 mA and RS485 pressure transmitter

Industrial Pressure Transmitters (4-20mA / IO-Link)

  • 4-20 mA current loop
Manufacturer part number
00543
Manufacturer
Supmea

Supmea SUP-P302-B anti-corrosion pressure transmitter, converting fluid pressure into a standard electrical signal. It measures gauge, absolute and sealed pressure and suits corrosive media.

Product overview

Overview. The Supmea SUP-P302-B anti-corrosion pressure transmitter is an industrial pressure transmitter. It converts the pressure of the measured medium into a standard electrical signal using a ceramic piezoresistive pressure sensor, a high-reliability amplifier circuit and precise temperature compensation.

Main characteristics. Accuracy of 0.5%, long-term stability of ±0.5%FS per year and temperature drift of ±3%FS. The measuring range runs from -0.1 MPa to 2 MPa, covering gauge, absolute and sealed pressure, with an overload pressure of 200%FS.

Interfaces and outputs. 4-20 mA analogue output, or RS485 output depending on the version, with response times of 10 ms or less for current and voltage outputs and 100 ms or less for RS485 (up to 90%FS). Several output versions are available, including 0-10 V, 0-5 V and 1-5 V, and some include a 4-digit display. Load resistance for the 4-20 mA output is (U-10 V)/0.02 A, where U is the supply voltage.

Power and environment. Supply range of 10 to 32 V for the 4-20 mA output and 8 to 32 V for the RS485 output, with ranges adapted to the display versions. Working temperature from -20 to 85 °C, storage temperature from -40 to 85 °C, compensation temperature from 0 to 70 °C and medium temperature from -20 to 85 °C. Ingress protection IP65, dielectric strength of 500 VAC at 50 Hz and insulation resistance of 20 MΩ at 250 VDC.

Typical uses. The housing is designed to resist corrosion, and the transmitter is intended for pressure measurement of corrosive fluids in the chemical industry, such as acids and alkalis. The RS485 output allows connection to a supervision system or a PLC.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote