PSD330
Industrial 2.5-inch PATA MLC SSD

- Interface bus
- PATA
- Type Flash
- MLC NAND flash
- Capacité
- 32 Go; 64 Go; 128 Go
- Certificat
- CE; UKCA; FCC; BSMI
Industrial 2.5-inch PATA MLC SSD
The PSD330 is an industrial 2.5-inch SSD with a PATA interface, designed to replace a 2.5-inch IDE hard disk and improve overall system performance.
Overview. The Transcend PSD330 is an industrial-grade 2.5-inch PATA SSD available in 32 GB, 64 GB and 128 GB capacities. It is an alternative to the traditional 2.5-inch IDE hard disk, designed for installation in desktop computers, laptops or portable devices built around the 2.5-inch PATA (IDE) standard.
Main characteristics. The PSD330 uses MLC NAND flash memory and offers sequential read speeds of up to 120 MB/s and sequential write speeds of up to 75 MB/s according to CrystalDiskMark. Its endurance reaches up to 80 TBW for the highest capacity. The MTBF is 1,000,000 hours. Speeds may vary depending on the host hardware, software, usage and storage capacity.
Interface and reliability. The SSD has a PATA bus interface and operates in Ultra DMA mode. It integrates ECC (Error Correction Code), bad block management, wear leveling, TRIM, garbage collection and static data refresh. It supports S.M.A.R.T. for monitoring the health status of the device, as well as a security command.
Power and environment. The operating voltage is 5 V ±5%, with a power consumption of 1.24 W in operation. It supports a storage temperature from -40°C to 85°C, humidity from 0% to 95%, a shock of 1500 G for 0.5 ms on 3 axes, and an operating vibration of 20 G peak to peak between 20 Hz and 2,000 Hz.
Dimensions and compliance. The SSD measures 100.3 mm x 69.85 mm x 7.4 mm and weighs 55 g. It is certified CE, UKCA, FCC and BSMI and complies with RoHS 2.0. Transcend states that 100% compatibility with all platforms cannot be guaranteed and recommends contacting them beforehand for special applications.
Integration. The PSD330 mounts in a 2.5-inch bay with a PATA interface. It is available on quotation from Atlas Electronics.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for PSD330, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| Dimensions | 100.3 mm x 69.85 mm x 7.4 mm (3.95" x 2.75" x 0.29") |
| Capacité | 32 Go; 64 Go; 128 Go |
| Certificat | CE; UKCA; FCC; BSMI |
| Choc | 1500 G, 0.5 ms, 3 axes |
| Consommation électrique (opération) | 1.24 watt(s) |
| Facteur de forme | 2.5" |
| Humidité | 0% ~ 95% |
| Interface bus | PATA |
| Lecture/écriture séquentielle (CrystalDiskMark) | Lecture: Jusqu’à 120 Mo/s; Ecriture: Jusqu’à 75 Mo/s |
| Note | La vitesse peut varier en fonction du matériel hôte, des logiciels, de l'utilisation et de la capacité de stockage.; Les téraoctets écrits (TBW) expriment l'endurance de la capacité la plus élevée. |
| Poids | 55 g (1.94 oz) |
| Téraoctets écrits (TBW) | Jusqu’à 80 TBW |
| Température de stockage | -40°C (-40°F) ~ 85°C (185°F) |
| Temps moyen entre pannes (MTBF) | 1,000,000 heure(s) |
| Tension de fonctionnement | 5V±5% |
| Type Flash | MLC NAND flash |
| Vibration (fonctionnement) | 20 G (de crête à crête), 20 Hz ~ 2,000 Hz (fréquence) |
No specification matches.
Last verification : 2026-11-04
Official documents and the technical data recorded for PSD330. For a missing document or a specific revision, our experts send it to you.
The PSD330 is an industrial 2.5-inch SSD with a PATA interface, designed to replace a 2.5-inch IDE hard disk and improve overall system performance.
| Parameter | Value |
|---|---|
| Dimensions | 100.3 mm x 69.85 mm x 7.4 mm (3.95" x 2.75" x 0.29") |
| Capacité | 32 Go; 64 Go; 128 Go |
| Certificat | CE; UKCA; FCC; BSMI |
| Choc | 1500 G, 0.5 ms, 3 axes |
| Consommation électrique (opération) | 1.24 watt(s) |
| Facteur de forme | 2.5" |
| Humidité | 0% ~ 95% |
| Interface bus | PATA |
| Lecture/écriture séquentielle (CrystalDiskMark) | Lecture: Jusqu’à 120 Mo/s; Ecriture: Jusqu’à 75 Mo/s |
| Note | La vitesse peut varier en fonction du matériel hôte, des logiciels, de l'utilisation et de la capacité de stockage.; Les téraoctets écrits (TBW) expriment l'endurance de la capacité la plus élevée. |
| Poids | 55 g (1.94 oz) |
| Téraoctets écrits (TBW) | Jusqu’à 80 TBW |
| Température de stockage | -40°C (-40°F) ~ 85°C (185°F) |
| Temps moyen entre pannes (MTBF) | 1,000,000 heure(s) |
| Tension de fonctionnement | 5V±5% |
| Type Flash | MLC NAND flash |
| Vibration (fonctionnement) | 20 G (de crête à crête), 20 Hz ~ 2,000 Hz (fréquence) |
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
Industrial 2.5-inch PATA MLC SSD

2.5" SATA & PATA SSDs

2.5" SATA & PATA SSDs

2.5" SATA & PATA SSDs

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | PSD330 |
| Manufacturer | Transcend |
SATA SSDs
Industrial 2.5-inch SATA III SSD with 3D-TLC flash · Ref. : GSD25ST
Price on request
SATA SSDs
Industrial 2.5-inch SATA III SSD without DRAM, 112-layer 3D NAND · Ref. : SSD460K-SSD460K-I
Price on request
SATA SSDs
128 GB SATA III SSD with TLC Storage · Ref. : SSD-128G-S3
Price on request
SATA SSDs
SATA III 2.5-inch MLC NAND SSD, 32 GB to 1 TB · Ref. : SSD370
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details