USR-SDR080 – Industrial 8-port unmanaged Ethernet switch, DIN rail mount

Industrial 8-port unmanaged Ethernet switch, DIN rail mount

Industrial Ethernet Switches, PoE & TSN Networking

  • -40℃~+85℃
  • -40~85℃
  • 8*10/100M
  • PWR,Link/ACT
Manufacturer part number
SDR080
Manufacturer
USR IoT
Interface — LED indicators
PWR,Link/ACT

The USR-SDR080 from USR IoT is an unmanaged industrial Ethernet switch with 8 ports 10/100M, designed for network transmission in industrial environments, including high-definition video and data acquisition.

Product overview

Overview. The USR IoT USR-SDR080 is an 8-port 10/100M unmanaged industrial Ethernet switch designed to extend networks in industrial installations.

Main characteristics. The switch provides 8 RJ45 ports at 10/100Mbps with automatic MDI/MDIX detection, a switching capacity of 1.6G, a packet forwarding rate of 1.19Mpps, a 512K buffer and a 1K MAC address table. It supports flow control, jumbo frames up to 2048 bytes and a forwarding delay below 4us.

Interfaces and connectivity. Each Ethernet port is indicated by Link/ACT LEDs, and a PWR LED shows the power status. Bus, star and tree topologies are supported.

Power and environment. Power is supplied through a Phoenix terminal block at DC 10-58V with redundant dual power supply. Consumption is below 6W in the normal model and below 126W in the PoE model. The fanless aluminium alloy housing operates from -40℃ to +85℃ at 5% to 95% relative humidity, non-condensing, with an IP40 protection rating.

Protection. The switch is certified CE, FCC and RoHS. It meets level 4 of IEC 61000-4-2 for electrostatic discharge, level 3 of IEC 61000-4-5 for surges on the Ethernet ports and power supply, and level 3 of IEC 61000-4-4 for fast transients.

Integration. It mounts on a DIN rail. The USR-SDR080 is configured through a setup utility, a web page or AT commands, with static IP or DHCP addressing, and supports UDP broadcast and Websocket.

Typical uses. The switch suits network transmission in intelligent transportation and video surveillance, where high-definition cameras increase data volume.

See all specifications

Highlights

  • Cable type — Twisted-pair: 100m(CAT5E, CAT6)
  • Electrical Specifications — Input voltage: DC 10-58V
  • EMC&Ingress protection — EMI: CLASS A
  • EMC&Ingress protection — ESD: IEC 61000-4-2 Level 4(8K/15K)
  • EMC&Ingress protection — Ethernet port surge protection: IEC 61000-4-5 Level 3(4KV/2KV)(10/700us)
  • EMC&Ingress protection — Free fall: 0.5m

Good to know before integrating

  • Thermal: rated operating range -40℃~+85℃ — check it against the installation environment.
  • Thermal: rated operating range -40~85℃ — check it against the installation environment.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote