Product overview
USR-SSO10. The USR-SSO10 soil multi-parameter sensor from USR IoT integrates temperature, humidity, pH, electrical conductivity and nitrogen, phosphorus and potassium (NPK) measurement in a single housing. It is intended for soil moisture monitoring and scientific experiments.
Measurements. Ranges: humidity 0 to 100 %, pH 3 to 9, conductivity 0 to 10000 µs/cm, NPK 0 to 1999 mg/kg, soil temperature -40 to 80 °C. Conductivity is measured by the AC bridge method.
Connectivity. RS485 output using the standard Modbus-RTU protocol. Cable length of 5 metres by default, customizable. Wires: black for GND, yellow for RS485 A, blue for RS485 B, red for power supply.
Power and environment. DC power supply 12 to 24 V, consumption 10 mA at 12 V. Protection level IP68, housing sealed in black flame-retardant epoxy resin, working temperature -40 to 80 °C.
Installation. Buried in the soil: dig a pit about 20 cm deep, insert the sensor horizontally, then fill and compact the soil. It can also be inserted into the soil or immersed in a culture solution.
Typical uses. Monitoring of soil moisture and fertility, greenhouses, pastures and scientific experiments. The RS485 Modbus-RTU output allows connection to a PLC or gateway.