AW9523B
16-pin I/O expansion board with I2C interface

- Operating Temperature
- -40-85℃
- Controlling Interface
- I2C
- Low Standby Current
- <0.1µA
- Dimensions
- 38x23mm
16-pin I/O expansion board with I2C interface
Maker, Prototyping, Open-Hardware & Developer Boards
The Waveshare AW9523B expansion board adds 16 input-output pins to a microcontroller or SBC over an I2C bus. It suits prototyping projects and development boards.
Overview. The Waveshare Electronics AW9523B expansion board, reference AW9523B, is a 38 x 23 mm I/O expansion module that adds 16 I/O pins to a system controlled over an I2C bus.
Main characteristics. The module operates from 2.4 to 5.5 V and accepts a 3.3 V or 5 V input. Its standby current is below 0.1 µA and its operating temperature range is -40 to 85 ℃.
Interfaces and connectivity. It is controlled through the SDA (I2C data) and SCL (I2C clock) pins, complemented by an INT interrupt output and an RST hardware reset pin. Two connector options are offered: a PH2.0 header and/or solder pads. Multiple I2C modules can be stacked.
Typical uses. The module adds digital inputs and outputs to a microcontroller or development board with an I2C bus, to drive or read additional signals.
Integration. The board connects to the VCC, GND, SDA and SCL pins of the host system. The PH2.0 connector simplifies wiring, and stacking several modules increases the number of I/O available on the bus.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for AW9523B, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| Dimensions | 38x23mm |
| Category | Raspberry Pi (919) AI (388) Luckfox (101) RISC-V (14) ESP32 (176) Arduino (4) Displays (407) IoT / Communication (367) Misc Modules (316) Robotics (114) MCU / FPGA (143) Sockets / Adapters (192) Accessories (204) |
| Controlling Interface | I2C |
| GND | Ground |
| INT | Interrupt output |
| Low Standby Current | <0.1µA |
| Operating Temperature | -40-85℃ |
| Operating Voltage | 2.4-5.5V |
| PIN | I2C interface |
| Provides two connector options | PH2.0 header and/or solder pads, allows multi I2C modules to be stacked |
| RST | Hardware reset |
| SCL | I2C clock pin |
| SDA | I2C data pin |
| VCC | Power (support 3.3V / 5V input) |
No specification matches.
Last verification : 2026-11-01
Official documents and the technical data recorded for AW9523B. For a missing document or a specific revision, our experts send it to you.
The Waveshare AW9523B expansion board adds 16 input-output pins to a microcontroller or SBC over an I2C bus. It suits prototyping projects and development boards.
| Parameter | Value |
|---|---|
| Dimensions | 38x23mm |
| Category | Raspberry Pi (919) AI (388) Luckfox (101) RISC-V (14) ESP32 (176) Arduino (4) Displays (407) IoT / Communication (367) Misc Modules (316) Robotics (114) MCU / FPGA (143) Sockets / Adapters (192) Accessories (204) |
| Controlling Interface | I2C |
| GND | Ground |
| INT | Interrupt output |
| Low Standby Current | <0.1µA |
| Operating Temperature | -40-85℃ |
| Operating Voltage | 2.4-5.5V |
| PIN | I2C interface |
| Provides two connector options | PH2.0 header and/or solder pads, allows multi I2C modules to be stacked |
| RST | Hardware reset |
| SCL | I2C clock pin |
| SDA | I2C data pin |
| VCC | Power (support 3.3V / 5V input) |
Points to check before using AW9523B in a design. They are derived from the recorded characteristics, not from the manufacturer's application circuits.
| Low Standby Current | <0.1µA |
| Operating Voltage | 2.4-5.5V |
Check the exact pin assignment and the application circuit in the datasheet, or ask our experts.
Answers to the questions that the recorded characteristics of AW9523B can answer. A question is not asked when nothing is recorded to answer it.
Yes — recorded under "Controlling Interface": I2C.
-40-85℃ (source: Operating Temperature).
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
16-pin I/O expansion board with I2C interface

Sensor Adapter for Click, QWIIC and Grove Modules

RS485 Module 3PEAK TP8485E

4-20mA Module STMicroelectronics LM2902

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | AW9523B |
| Manufacturer | Waveshare Electronics |
Maker, Prototyping, Open-Hardware & Developer Boards
M12 fisheye lens for camera module · Ref. : M12_FISHEYE
Price on request
Maker, Prototyping, Open-Hardware & Developer Boards
RK3568 System-on-Module with 1 TOPS NPU
Price on request
Maker, Prototyping, Open-Hardware & Developer Boards
Dual Gigabit Ethernet Carrier Board for Raspberry Pi Compute Module 4
Price on request
Maker, Prototyping, Open-Hardware & Developer Boards
RK3568 Android tablet mainboard with DTV tuner · Ref. : K3-3568
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details