Waveshare BME68X environmental sensor module measuring temperature, humidity, barometric pressure and VOC and VSC gas changes, with I2C and SPI interfaces.
Overview. The Waveshare BME68X is an environmental sensor module combining temperature, relative humidity, barometric pressure and gas detection in a 27 × 20 mm format.
Main characteristics. The temperature range is -40 to 85 °C with an accuracy of ±0.5 °C (0 to 65 °C). Relative humidity is measured from 0 to 100 %RH with an accuracy of ±3 %RH. Barometric pressure covers 300 to 1100 hPa with an accuracy of ±0.6 hPa (0 to 65 °C), or ±1.0 hPa over the stated 0 to 65 °C range. The module supports VOC and VSC gas change detection.
Interfaces and power. The module communicates over I2C or SPI, with VCC (3.3 V/5 V power supply), GND, SDA/MOSI, SCL/SCK and CS pins, CS being active low for SPI chip selection.
Typical uses. Its compact size and I2C and SPI interfaces allow integration into microcontroller boards and embedded systems for monitoring ambient conditions.
Waveshare BME68X environmental sensor module measuring temperature, humidity, barometric pressure and VOC and VSC gas changes, with I2C and SPI interfaces.
Gas sensing — - — supports VOC gas change detection
supports VOC and VSC gas change detection
GND
Ground
Humidity sensing — accuracy
±3%RH
Humidity Sensing Range
0~100%RH
PIN — I2C
SPI
SCL/SCK — I2C clock
SPI clock input
SDA/MOSI — I2C data
SPI data master output/slave input
Temperature sensing — accuracy — ±1.0℃ (0~65℃)
±0.5℃ (0~65℃)
Temperature Sensing Range
-40~85°C
VCC
3.3V/5V power supply
Applications and use cases
Architectures in which BME68X can play a role, derived from its category. This is not a compatibility statement: check the specifications against your requirements.
A fridge that drifts at night can ruin a whole stock. Temperature loggers in cold rooms and trucks report through a gateway or a tracker and raise an alert when a threshold is crossed
To check
Temperature range and accuracy required by the product
Record keeping required by the applicable regulations
A building’s energy, comfort and occupancy data sit in separate systems. Sensors, meters and gateways feed one model of the building, room by room, to compare scenarios and steer the installations
To check
Data model and building plans available
Software platform hosting the twin
Sensor density needed for a useful model
Associated system blocks
SensorsMetersGateways
Need a complete solution?
Send a request for BME68X and the other parts of your project.
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
Current productWaveshare Electronics
BME68X
Environmental sensor temperature humidity pressure gas I2C SPI
What is recorded about the regulatory status and the life of this part.
Regulatory compliance
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details