BMP390
High Precision Barometric Pressure Sensor with I2C/SPI

- Operating Temperature
- -40~85℃
- Communication interfaces
- I2C / SPI
- SCL — I2C clock — SDI
- SPI data, can be connected to host MOSI
- Dimensions
- 32 × 20mm
High Precision Barometric Pressure Sensor with I2C/SPI
The Waveshare BMP390 is a high precision barometric pressure sensor that also measures temperature and supports altitude calculation. It connects via I2C or SPI.
Overview. The Waveshare Electronics BMP390 is a high precision barometric pressure sensor module, dimensions 32 × 20 mm, that measures barometric pressure, altitude and temperature.
Main characteristics. The barometric pressure range is 300 to 1250 hPa and the operating temperature range is -40 to 85 ℃. The temperature sensitivity is ±0.6 Pa/K (at 900 hPa, 25 to 40 °C). The possible sampling rate reaches 200 Hz.
Interfaces and connectivity. The module communicates via I2C or SPI. Pins include SCL and SDA for the I2C bus, SCK, SDI, SDO and CS for the SPI bus, plus an INT interrupt output that can be connected to an I/O pin.
Power. The module operates from a 3.3 V or 5 V supply on the VCC pin, with GND as ground.
Typical uses. With its I2C and SPI interfaces, the sensor can be integrated with a microcontroller, a Raspberry Pi board or an ESP32 for altitude measurement and atmospheric pressure monitoring.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for BMP390, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| Dimensions | 32 × 20mm |
| Barometric pressure | 300~1250 hPa |
| Category | Raspberry Pi (919) AI (388) Luckfox (101) RISC-V (14) ESP32 (176) Arduino (4) Displays (407) IoT / Communication (367) Misc Modules (316) Robotics (114) MCU / FPGA (143) Sockets / Adapters (192) Accessories (204) |
| Communication interfaces | I2C / SPI |
| Cs | Chip selection, can be connected to I/O |
| Detection Support | barometric pressure, altitude, temperature |
| GND — Ground — GND | Ground |
| INT — interrupt output, can be connected to I/O — SCK | SPI clock input |
| Operating Temperature | -40~85℃ |
| PIN — I2C — PIN | SPI |
| Possible sampling rate | 200Hz |
| SCL — I2C clock — SDI | SPI data, can be connected to host MOSI |
| SDA — I2C data — SDO | SPI data, can be connected to host MISO |
| Temperature | ±0.6Pa/K (@900hPa,25-40°C) |
| VCC — 3.3V/5V power supply — VCC | 3.3V/5V power supply |
No specification matches.
Last verification : 2026-11-01
Official documents and the technical data recorded for BMP390. For a missing document or a specific revision, our experts send it to you.
The Waveshare BMP390 is a high precision barometric pressure sensor that also measures temperature and supports altitude calculation. It connects via I2C or SPI.
| Parameter | Value |
|---|---|
| Dimensions | 32 × 20mm |
| Barometric pressure | 300~1250 hPa |
| Category | Raspberry Pi (919) AI (388) Luckfox (101) RISC-V (14) ESP32 (176) Arduino (4) Displays (407) IoT / Communication (367) Misc Modules (316) Robotics (114) MCU / FPGA (143) Sockets / Adapters (192) Accessories (204) |
| Communication interfaces | I2C / SPI |
| Cs | Chip selection, can be connected to I/O |
| Detection Support | barometric pressure, altitude, temperature |
| GND — Ground — GND | Ground |
| INT — interrupt output, can be connected to I/O — SCK | SPI clock input |
| Operating Temperature | -40~85℃ |
| PIN — I2C — PIN | SPI |
| Possible sampling rate | 200Hz |
| SCL — I2C clock — SDI | SPI data, can be connected to host MOSI |
| SDA — I2C data — SDO | SPI data, can be connected to host MISO |
| Temperature | ±0.6Pa/K (@900hPa,25-40°C) |
| VCC — 3.3V/5V power supply — VCC | 3.3V/5V power supply |
Points to check before using BMP390 in a design. They are derived from the recorded characteristics, not from the manufacturer's application circuits.
| VCC — 3.3V/5V power supply — VCC | 3.3V/5V power supply |
Check the exact pin assignment and the application circuit in the datasheet, or ask our experts.
Answers to the questions that the recorded characteristics of BMP390 can answer. A question is not asked when nothing is recorded to answer it.
Yes — recorded under "Cs": Chip selection, can be connected to I/O.
Yes — recorded under "Communication interfaces": I2C / SPI.
Yes — recorded under "Communication interfaces": I2C / SPI.
-40~85℃ (source: Operating Temperature).
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
High Precision Barometric Pressure Sensor with I2C/SPI

0.2 Inch Thin Film Resistor type Pressure Sensor - FSR400 A301

Water Pressure Sensor G1/4 1.2MPa

RS485 Pipe Pressure Sensor Transmitter 100MPa

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | BMP390 |
| Manufacturer | Waveshare Electronics |
Pressure Sensor Modules
LoRaWAN pressure sensor, SS316 transducer · Ref. : LORAWAN-PRESSURE-SENSOR
Price on request
Pressure Sensor Modules
High pressure sensor with digital I²C output · Ref. : MPM283I
Price on request
Pressure Sensor Modules
Thin film hydraulic pressure sensor 0-5 to 2000 bar · Ref. : HPT906
Price on request
Pressure Sensor Modules
Zigbee temperature, humidity and air pressure sensor · Ref. : 6979033600706
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details