CH343
High-speed USB to UART communication module

- Communication Range
- 50bps ~ 6Mbps
- Device interface
- UART
- Host interface
- USB
- CTS
- Connects to MCU.RTS
High-speed USB to UART communication module
Maker, Prototyping, Open-Hardware & Developer Boards
The Waveshare CH343 is a high-baud-rate USB to UART interface with micro, mini, Type-A and Type-C connectors, linking a computer to a microcontroller.
Overview. The Waveshare CH343 USB to UART module is a USB to UART conversion board for prototyping and development. It connects a host computer to a microcontroller or to any equipment with a serial link.
Main characteristics. The module operates over a communication range from 50 bps to 6 Mbps. It is supplied with four USB connector types: mini-USB, micro-USB, USB Type-A and USB Type-C.
Interfaces and connectivity. On the UART side, the board provides a 6-pin right-angle pin header with IO protection diodes. The RTS and CTS signals are available for hardware flow control. The USB device interface is protected by a resettable fuse and ESD protection.
Power and indicators. A VCC output delivers 5 V or 3.3 V to an external device, selected by a jumper. Indicators show power detected on the USB interface (PWR), data sent from USB (TXD) and data received from the device interface (RXD).
Typical uses. This module suits programming and debugging of microcontroller boards, and serial communication between a computer and an electronic device.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for CH343, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| Category | Raspberry Pi (919) AI (388) Luckfox (101) RISC-V (14) ESP32 (176) Arduino (4) Displays (407) IoT / Communication (367) Misc Modules (316) Robotics (114) MCU / FPGA (143) Sockets / Adapters (192) Accessories (204) |
| Communication Range | 50bps ~ 6Mbps |
| CTS | Connects to MCU.RTS |
| Device interface | UART |
| GND | Ground |
| Host interface | USB |
| PWR | Power indicator, turn on when the voltage is detected from USB interface |
| RTS | Connects to MCU.CTS |
| RXD | Receiving indicator, turn on when data is sent back from the device interface |
| TXD | Sending indicator, turn on when data is sent from USB |
| UART Interface | connector: 6pin right-angle pinheader; protection: IO protection diode |
| USB DEVICE INTERFACE | connector: mini-USB, micro-USB, USB Type-A, USB Type-C; protection: resettable Fuse, ESD protection |
| VCC | 5V or 3.3V output for external device (configured by jumper) |
No specification matches.
Last verification : 2026-11-01
Official documents and the technical data recorded for CH343. For a missing document or a specific revision, our experts send it to you.
The Waveshare CH343 is a high-baud-rate USB to UART interface with micro, mini, Type-A and Type-C connectors, linking a computer to a microcontroller.
| Parameter | Value |
|---|---|
| Category | Raspberry Pi (919) AI (388) Luckfox (101) RISC-V (14) ESP32 (176) Arduino (4) Displays (407) IoT / Communication (367) Misc Modules (316) Robotics (114) MCU / FPGA (143) Sockets / Adapters (192) Accessories (204) |
| Communication Range | 50bps ~ 6Mbps |
| CTS | Connects to MCU.RTS |
| Device interface | UART |
| GND | Ground |
| Host interface | USB |
| PWR | Power indicator, turn on when the voltage is detected from USB interface |
| RTS | Connects to MCU.CTS |
| RXD | Receiving indicator, turn on when data is sent back from the device interface |
| TXD | Sending indicator, turn on when data is sent from USB |
| UART Interface | connector: 6pin right-angle pinheader; protection: IO protection diode |
| USB DEVICE INTERFACE | connector: mini-USB, micro-USB, USB Type-A, USB Type-C; protection: resettable Fuse, ESD protection |
| VCC | 5V or 3.3V output for external device (configured by jumper) |
Answers to the questions that the recorded characteristics of CH343 can answer. A question is not asked when nothing is recorded to answer it.
Yes — recorded under "Host interface": USB.
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
High-speed USB to UART communication module

Sensor Adapter for Click, QWIIC and Grove Modules

RS485 Module 3PEAK TP8485E

4-20mA Module STMicroelectronics LM2902

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | CH343 |
| Manufacturer | Waveshare Electronics |
Maker, Prototyping, Open-Hardware & Developer Boards
M12 fisheye lens for camera module · Ref. : M12_FISHEYE
Price on request
Maker, Prototyping, Open-Hardware & Developer Boards
RK3568 System-on-Module with 1 TOPS NPU
Price on request
Maker, Prototyping, Open-Hardware & Developer Boards
Dual Gigabit Ethernet Carrier Board for Raspberry Pi Compute Module 4
Price on request
Maker, Prototyping, Open-Hardware & Developer Boards
RK3568 Android tablet mainboard with DTV tuner · Ref. : K3-3568
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details