Waveshare carrier board for Raspberry Pi Compute Module 4, with CM4 socket, HDMI, USB, Gigabit Ethernet and M.2 connectors, supplied with a USB HDMI adapter.
onCM4 would be booted from USB-C interface
Weight0.13 kg
WikiCM4-IO-BASE-A
Product overview
Waveshare CM4-IO-BASE-A. carrier board for Raspberry Pi Compute Module 4: the CM4-IO-BASE-A is supplied with a USB HDMI adapter. Main characteristics — The board accepts all variants of Compute Module 4 through a standard CM4 socket and a colour-coded Raspberry Pi 40-pin GPIO header, and is suitable for Compute Module 4 Lite and eMMC modules. Interfaces and connectivity — The board provides a DISP MIPI DSI display port, two MIPI CSI camera ports (CAM), an HDMI0 port supporting 4K output at 30 fps, two USB 2.0 ports, a Gigabit Ethernet RJ45 connector with 10/100/1000M network support, a Micro SD card slot and an M.2 slot. Power and cooling — Power input is 5V/2.5A, also used for programming or eMMC burning. A FAN connector allows a cooling fan to be connected, with speed adjustment and measurement. PWR, ACT and M.2 indicators show the status of the power, the Raspberry Pi and the M.2 interface. Boot mode — A switch selects whether the CM4 boots from eMMC or Micro SD card (off) or from the USB-C interface (on). Typical uses — This board suits a compact Compute Module 4 design requiring a display, cameras or M.2 storage.
Waveshare carrier board for Raspberry Pi Compute Module 4, with CM4 socket, HDMI, USB, Gigabit Ethernet and M.2 connectors, supplied with a USB HDMI adapter.
Architectures in which CM4-IO-BASE-A can play a role, derived from its category. This is not a compatibility statement: check the specifications against your requirements.
A proprietary PLC locks the project into one vendor’s tools. Industrial controllers built on the Raspberry Pi Compute Module run Linux, Node-RED, Python or CODESYS on DIN rail, with I/O modules, an operator panel and a cellular router for remote access
Not every vision task justifies an industrial vision system. A Raspberry Pi with a camera module and an expansion board runs simple detection and counting models at low cost, close to the scene
To check
Frame rate and model size the board can run
Lighting and lens for the scene
Enclosure and cooling for the installation
Associated system blocks
ComputeCameras
Need a complete solution?
Send a request for CM4-IO-BASE-A and the other parts of your project.
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
Current productWaveshare Electronics
CM4-IO-BASE-A
Carrier board for Compute Module 4 with USB HDMI adapter
What is recorded about the regulatory status and the life of this part.
Regulatory compliance
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details