Transportation & Fleet
Connectivity and computing on vehicles and along infrastructure
To check
- Supply-voltage range and transient immunity for vehicle power
- Antenna placement and multi-band coverage
- Shock and vibration ratings
Multi-band 4G communication module with GNSS positioning
OEM Cellular Modules (M.2 / mPCIe)
M.2 4G LTE Cat 4 cellular communication module with GNSS positioning, designed for network connectivity and location in embedded systems.
Overview. The Waveshare SIM7600X is a 4G communication module, a cellular module in a 38.8 x 42.0 mm format, designed to add network connectivity and GNSS positioning to a host system.
Main characteristics. The module supports LTE Cat 4 in FDD on bands B1, B2, B3, B4, B5, B7, B8, B12, B13, B18, B19, B20, B25, B26, B28 and B66, and in TDD on bands B34, B38, B39, B40 and B41. It is compatible with 4G, 3G and 2G and includes a GNSS receiver with a sensitivity of -159 dBm (GPS) and -158 dBm (GLONASS); the time-to-first-fix cold start in open air is under 35 s.
Interfaces and connectivity. The module provides a USB interface, a UART interface compatible with 3.3 V and 5 V levels, an onboard Nano SIM slot compatible with 1.8 V and 3 V SIM cards, and control pins (PWR, RST, FLT, DTR, RI, NET). It supports the network protocols TCP/IP, IPv4/IPv6, MQTT/MQTTS, FTP/FTPS, HTTP/HTTPS and DNS, with internet access over PPP, NDIS or RNDIS, and SMS of types MT, MO, CB, text and PDU. Antenna connectors are an optional SMA or IPEX 1 for the main antenna, IPEX 1 by default for the auxiliary antenna and GNSS antenna.
Power and environment. The module can be powered from the USB port, from the VIN pin (5 V to 26 V) or from the VBAT pin for a 3.7 V lithium battery. The VIO I/O voltage is 3.3 V by default and configurable from 3.8 V to 5 V. The operating temperature ranges from -30 °C to 80 °C and the storage temperature from -45 °C to 90 °C.
Typical uses. The module is intended for medical and health applications, smart payment, environmental monitoring, energy monitoring, fleet management, smart industry and smart agriculture.
Integration. USB drivers are available for Windows XP to 11 and Linux, with the driver included on Raspberry Pi Raspbian. The module connects to a PC, a Raspberry Pi or a Jetson Nano for 4G networking, positioning, AT command testing and firmware upgrade.
Derived from the part category, not a compatibility statement.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for SIM7600X, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| Dimensions | 38.8 x 42.0mm |
| Frequency band | Frequency band |
| Antenna Connectors | MAIN: 4G main antenna (optional SMA connector or IPEX 1 connector version); AUX: 4G auxiliary antenna (IPEX 1 connector by default, can be mass-customized as SMA connector); GNSS: Positioning antenna (IPEX 1 connector by default, can be mass-customized as SMA connector) |
| Applicable regions | Global |
| Applicable regions — China — Europe/Southeast Asia/West Asia/Africa/China/Korea — North America | global |
| Category | Raspberry Pi (919) AI (388) Luckfox (101) RISC-V (14) ESP32 (176) Arduino (4) Displays (407) IoT / Communication (367) Misc Modules (316) Robotics (114) MCU / FPGA (143) Sockets / Adapters (192) Accessories (204) |
| DN — USB signal cable Data- — PWK | module power on/off pin |
| DP — USB signal cable Data+ — RTS | Module reset pin |
| FLT — Flight mode — DTR | Sleep mode wake up |
| GND — Power ground — BAT | 3.7V Lithium battery power input |
| GNSS | GNSS |
| Hardware Interface | Hardware Interface |
| Internet access | PPP/NDIS/RNDIS |
| IO41 — Controll GPIO41 high or low level output by AT command — CTS | UART flow control |
| IO43 — Controll GPIO43 high or low level output by AT command — RTS | UART flow control |
| LTE Cat 4 | LTE-FDD: B1/B2/B3/B4/B5/B7/B8/B12/B13/B18; /B19/B20/B25/B26/B28/B66; LTE-TDD: B34/B38/B39/B40/B41 |
| Module — SIM7600CE-T* — SIM7600E-H — SIM7600A-H* | SIM7600G-H |
| NET — Network Indicator — GND | Power Ground |
| Network Protocol | TCP/IP/IPV4/IPV6/MQTT/MQTTS/Multi-PDP/FTP/FTPS/HTTP/HTTPS/DNS |
| Operating Temperature | -30°C ~ 80°C |
| Operating Voltage | 3.3V by default (configurable as 3.8V-5V via VIO pin by connecting external voltage) |
| Other | Other |
| Other interface | Adapting other common control pins such as GPIO, PWR, RST, FLT |
| Power supply | USB port or VBUS - GND pin: 5V power supply |
| Receiver Type | C/A Code |
| RI — Voice call wake up — TXD | UART Sending |
| SC — SIM card clock — VIN | wide voltage input, 5V~26V |
| SD — SIM card data — RXD | UART Receiving |
| Sensitivity | -159 dBm (GPS) / -158 dBm (GLONASS) / TBD (BeiDou) |
| SIM Card Slot | Onboard Nano SIM card slot, adapting related pins, compatible with 1.8V and 3V SIM card |
| SMS | Supported types: MT, MO, CB, Text, PDU |
| Software Features | Software Features |
| SR — SIM card reset — VIO | VCCIO, default 3.3V when is not connected, configurable as 3.8V-5V via VIO pin by connecting external voltage |
| Storage Temperature | -45°C ~ 90°C |
| Supports multiple power supply methods | USB port, VIN pin, and VBAT pin (for 3.7V lithium battery) |
| Time-To-First-Fix (open air) | Cold starts: <35s |
| Typical application | Medical and health, smart payment, public network intercom, environmental monitoring, energy monitoring, fleet management, smart industry, smart agriculture |
| UART Interface | Can be used to access MCU for 4G networking, positioning, AT command sending and receiving test, etc., compatible with 3.3V/5V working level |
| USB Driver | Windows XP/7/8/10/11, Linux (driver free on Raspberry Pi Raspbian system) |
| USB Interface | Can be used to access PC/Raspberry Pi/Jetson Nano and other hosts for 4G networking, positioning, AT command sending and receiving test, firmware upgrade, etc. |
| VBUS — USB power supply cable — 3V3 | power supply output |
| VSIM — SIM card power supply — GND | Power Ground |
No specification matches.
Last verification : 2026-11-01
Official documents and the technical data recorded for SIM7600X. For a missing document or a specific revision, our experts send it to you.
M.2 4G LTE Cat 4 cellular communication module with GNSS positioning, designed for network connectivity and location in embedded systems.
| Parameter | Value |
|---|---|
| Dimensions | 38.8 x 42.0mm |
| Frequency band | Frequency band |
| Antenna Connectors | MAIN: 4G main antenna (optional SMA connector or IPEX 1 connector version); AUX: 4G auxiliary antenna (IPEX 1 connector by default, can be mass-customized as SMA connector); GNSS: Positioning antenna (IPEX 1 connector by default, can be mass-customized as SMA connector) |
| Applicable regions | Global |
| Applicable regions — China — Europe/Southeast Asia/West Asia/Africa/China/Korea — North America | global |
| Category | Raspberry Pi (919) AI (388) Luckfox (101) RISC-V (14) ESP32 (176) Arduino (4) Displays (407) IoT / Communication (367) Misc Modules (316) Robotics (114) MCU / FPGA (143) Sockets / Adapters (192) Accessories (204) |
| DN — USB signal cable Data- — PWK | module power on/off pin |
| DP — USB signal cable Data+ — RTS | Module reset pin |
| FLT — Flight mode — DTR | Sleep mode wake up |
| GND — Power ground — BAT | 3.7V Lithium battery power input |
| GNSS | GNSS |
| Hardware Interface | Hardware Interface |
| Internet access | PPP/NDIS/RNDIS |
| IO41 — Controll GPIO41 high or low level output by AT command — CTS | UART flow control |
| IO43 — Controll GPIO43 high or low level output by AT command — RTS | UART flow control |
| LTE Cat 4 | LTE-FDD: B1/B2/B3/B4/B5/B7/B8/B12/B13/B18; /B19/B20/B25/B26/B28/B66; LTE-TDD: B34/B38/B39/B40/B41 |
| Module — SIM7600CE-T* — SIM7600E-H — SIM7600A-H* | SIM7600G-H |
| NET — Network Indicator — GND | Power Ground |
| Network Protocol | TCP/IP/IPV4/IPV6/MQTT/MQTTS/Multi-PDP/FTP/FTPS/HTTP/HTTPS/DNS |
| Operating Temperature | -30°C ~ 80°C |
| Operating Voltage | 3.3V by default (configurable as 3.8V-5V via VIO pin by connecting external voltage) |
| Other | Other |
| Other interface | Adapting other common control pins such as GPIO, PWR, RST, FLT |
| Power supply | USB port or VBUS - GND pin: 5V power supply |
| Receiver Type | C/A Code |
| RI — Voice call wake up — TXD | UART Sending |
| SC — SIM card clock — VIN | wide voltage input, 5V~26V |
| SD — SIM card data — RXD | UART Receiving |
| Sensitivity | -159 dBm (GPS) / -158 dBm (GLONASS) / TBD (BeiDou) |
| SIM Card Slot | Onboard Nano SIM card slot, adapting related pins, compatible with 1.8V and 3V SIM card |
| SMS | Supported types: MT, MO, CB, Text, PDU |
| Software Features | Software Features |
| SR — SIM card reset — VIO | VCCIO, default 3.3V when is not connected, configurable as 3.8V-5V via VIO pin by connecting external voltage |
| Storage Temperature | -45°C ~ 90°C |
| Supports multiple power supply methods | USB port, VIN pin, and VBAT pin (for 3.7V lithium battery) |
| Time-To-First-Fix (open air) | Cold starts: <35s |
| Typical application | Medical and health, smart payment, public network intercom, environmental monitoring, energy monitoring, fleet management, smart industry, smart agriculture |
| UART Interface | Can be used to access MCU for 4G networking, positioning, AT command sending and receiving test, etc., compatible with 3.3V/5V working level |
| USB Driver | Windows XP/7/8/10/11, Linux (driver free on Raspberry Pi Raspbian system) |
| USB Interface | Can be used to access PC/Raspberry Pi/Jetson Nano and other hosts for 4G networking, positioning, AT command sending and receiving test, firmware upgrade, etc. |
| VBUS — USB power supply cable — 3V3 | power supply output |
| VSIM — SIM card power supply — GND | Power Ground |
Points to check before using SIM7600X in a design. They are derived from the recorded characteristics, not from the manufacturer's application circuits.
| GND — Power ground — BAT | 3.7V Lithium battery power input |
| Operating Voltage | 3.3V by default (configurable as 3.8V-5V via VIO pin by connecting external voltage) |
| Power supply | USB port or VBUS - GND pin: 5V power supply |
| Supports multiple power supply methods | USB port, VIN pin, and VBAT pin (for 3.7V lithium battery) |
| VBUS — USB power supply cable — 3V3 | power supply output |
| VSIM — SIM card power supply — GND | Power Ground |
Check the exact pin assignment and the application circuit in the datasheet, or ask our experts.
Architectures in which SIM7600X can play a role, derived from its category. This is not a compatibility statement: check the specifications against your requirements.
Connectivity and computing on vehicles and along infrastructure
Charge-point controllers combine a metering and safety controller with a network link (Ethernet, Wi-Fi or cellular) toward a charge-point management system
Adding a mobile connection to a product means choosing a modem, a SIM and a way to manage both. A cellular modem or HAT, an IoT SIM and a router or gateway form one connectivity chain, managed from a single platform
Send a request for SIM7600X and the other parts of your project.
Answers to the questions that the recorded characteristics of SIM7600X can answer. A question is not asked when nothing is recorded to answer it.
Yes — recorded under "Antenna Connectors": MAIN: 4G main antenna (optional SMA connector or IPEX 1 connector version); AUX: 4G auxiliary antenna (IPEX 1 connector by default, can be mass-customized as SMA connector); GNSS: Positioning antenna (IPEX 1 connector by default, can be mass-customized as SMA connector).
Yes — recorded under "Antenna Connectors": MAIN: 4G main antenna (optional SMA connector or IPEX 1 connector version); AUX: 4G auxiliary antenna (IPEX 1 connector by default, can be mass-customized as SMA connector); GNSS: Positioning antenna (IPEX 1 connector by default, can be mass-customized as SMA connector).
Yes — recorded under "Antenna Connectors": MAIN: 4G main antenna (optional SMA connector or IPEX 1 connector version); AUX: 4G auxiliary antenna (IPEX 1 connector by default, can be mass-customized as SMA connector); GNSS: Positioning antenna (IPEX 1 connector by default, can be mass-customized as SMA connector).
Yes — recorded under "DN — USB signal cable Data- — PWK": module power on/off pin.
-30°C ~ 80°C (source: Operating Temperature).
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
Multi-band 4G communication module with GNSS positioning

Quectel mPCIe Module, LTE Cat 4 module with PCI Express Mini Card form factor, Supports Multiple Wireless Communication Modes

NB-IoT / Cat-M(EMTC) / GNSS Module For Raspberry Pi Pico, Global Band Support

SIMCom Original 4G LTE Cat-4 Module, Global Coverage, With GNSS Support, Mini-PCIe Connector, LTE-TDD, LTE-FDD, HSPA+, GSM, GPRS, EDGE

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | SIM7600X |
| Manufacturer | Waveshare Electronics |
OEM Cellular Modules (M.2 / mPCIe)
LTE Cat 1 embedded cellular module for AT&T · Ref. : MTQ-LAT3-B01.R2A
Price on request
OEM Cellular Modules (M.2 / mPCIe)
5G Router with Dual SIM Dual Module
Price on request
OEM Cellular Modules (M.2 / mPCIe)
4G LTE Android 4K TV box · Ref. : APC329L
Price on request
OEM Cellular Modules (M.2 / mPCIe)
Dual-band 2.4G/5G Wi-Fi and Bluetooth BLE 5.0 combo module · Ref. : RTL8720DN
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details