ST7796S – 3.5-inch IPS capacitive touch display module 320×480

3.5-inch IPS capacitive touch display module 320×480

Maker, Prototyping, Open-Hardware & Developer Boards

  • I2C
  • FT6336U
  • Capacitive
  • 61.00 × 92.44 (mm)
Manufacturer part number
ST7796S
Manufacturer
Waveshare Electronics
Display Interface
I2C
Display Driver
FT6336U

3.5-inch IPS capacitive touch LCD module, 320×480 pixels, for host boards such as Raspberry Pi, ESP32 or Arduino.

Product overview

Overview. The Waveshare ST7796S is a 3.5-inch IPS capacitive touch display module with 320×480 resolution and 262K colours, intended for prototyping and embedded development.

Main characteristics. The display embeds the ST7796S display driver and the FT6336U capacitive touch controller, with a display size of 61.00 × 92.44 mm, high touch transmittance and fast response. Touch detection is two-point.

Interfaces and connectivity. The display driver communicates over SPI and the touch controller over I2C, which minimises the number of required IO pins. An onboard TF card slot allows storing pictures, videos or files. The module connects to the host board through a 15-pin connector or an 18-pin FPC slot.

Power. An onboard voltage translator provides compatibility with 3.3 V and 5 V operating voltages.

Typical uses. The module suits the development of human-machine interfaces on Raspberry Pi, Raspberry Pi Pico 2, ESP32 or Arduino boards, with demos and manuals provided for these platforms.

Integration. Online development resources and a manual accompany the product. The module is available on quotation from Atlas Electronics.

See all specifications

Highlights

  • Display Driver: FT6336U
  • Display Interface: I2C
  • DISPLAY — Panel: Capacitive
  • Display size: 61.00 × 92.44 (mm)
  • Pixel Pitch: Two-point touch

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote