Operational need and target users
This turnkey hardware package is designed for industrial plant operators, system integrators, and maintenance teams seeking a ready-to-deploy monitoring and telemetry solution. It removes the complexity of selecting and interfacing disparate components by providing a pre-validated hardware set ready for cabinet integration.
The package meets requirements for continuous remote machinery monitoring, delivering reliable transmission of operational alarms and metrics to central supervisory platforms.
Base configuration composition
The standard baseline configuration incorporates all components necessary for the acquisition and transmission loop.
The HiBoost HSL12652 (Cellular Signal Boosters and Repeaters) addresses these field integration requirements and connects seamlessly to industrial networks.
The HiBoost REF-HW.0 (Cellular Signal Boosters and Repeaters) addresses these field integration requirements and connects seamlessly to industrial networks.
The HiBoost HSL10601 (Cellular Signal Boosters and Repeaters) addresses these field integration requirements and connects seamlessly to industrial networks.
The HiBoost HM106021 (Cellular Signal Boosters and Repeaters) addresses these field integration requirements and connects seamlessly to industrial networks.
Each component has been selected for hardware durability, efficient power consumption, and immediate compatibility with standard industrial protocols.
Hardware interfaces and connectivity
Interconnection utilizes proven wired interfaces (two-wire RS-485 serial buses, industrial RJ-45 Ethernet ports) ensuring electrical isolation between measurement instruments and the communication gateway.
The edge gateway handles frame conversion from Modbus RTU to Modbus TCP or MQTT, enabling seamless integration into modern SCADA supervisors or industrial cloud dashboards.
Expansion options and alternatives
Depending on specific site constraints, several modular options can be incorporated: adding a 4G or 5G cellular gateway for remote locations lacking wired infrastructure, distributed input/output modules, or high-gain external antennas.
Alternative power options for 12VDC or 48VDC operation can also be configured to match existing cabinet power sources.
Customer prerequisites and site scope
To finalize on-site commissioning, the customer supplies the protective enclosure (electrical cabinet or modular wall box), primary AC or DC power feed, and where applicable an activated SIM card from the chosen telecommunications carrier.
Physical DIN rail mounting and power cable terminations are performed by site technicians or electrical contracting partners.
Project workflow and commissioning
The project initiates when your operational requirements are reviewed by our engineering desk. Our team confirms electrical sizing and prepares recommended wiring diagrams.
Hardware is staged in our technical facility, labeled, and dispatched in protective packaging. Our specialists remain available to assist remotely during on-site commissioning and acceptance testing.
Quotation and Atlas ordering
Every packaged solution receives a customized formal quotation based on required quantities and selected modular expansions. Atlas commits to supplying genuine, industrial-grade equipment.
Contact our technical representatives today to receive a detailed bill of materials quotation.
Step by step
Inventory and requirements audit
List all field devices to connect, their communication protocols, and site environmental constraints to prepare integration.
Hardware selection and sizing
Validate the electrical schematic, confirm power budgets, and select appropriate gateways and power supplies meeting production needs.
Cabinet mounting and wiring
Mount modules onto TS-35 DIN rails, connect regulated 24VDC power feeds, and terminate communication buses according to EMC guidelines.
Software configuration and addressing
Configure static IP addresses, serial communication parameters, and network security credentials inside device firmware.
Acceptance testing and commissioning
Verify live telemetry reception, test communication interruption recovery, and validate overall operation across the operational site.
Bill of materials
Catalogue products that can fill each role. Atlas Electronics quotes the complete bill of materials for your project; you check each datasheet before ordering.
Signal booster
Hardware role for Signal booster functionality.
HSL12652
Cellular Signal Boosters and Repeaters
Smart Cellular Signal Booster 4G LTE with LCD Monitoring · Ref. : HSL12652
- 8.6 x 6.5 x 2 in
- 65 dB
- DL 12 dBm
Price on request
HiBoost Travel 3.0
Cellular Signal Boosters and Repeaters
Outdoor antenna for cellular signal booster · Ref. : ACCESSORIES_HIBOOST_3.0
- 30ft
- Corrosion-resistant
- two extension poles
Price on request
HSL10601
Cellular Signal Boosters and Repeaters
Indoor 4K cellular signal booster, 60 dB gain · Ref. : HSL10601
- 1,000 - 4,000 Sq. Feet
- 7.8 x 4.7 x 1.4 in
- 60 dB
Price on request
HM106021
Cellular Signal Boosters and Repeaters
4G LTE Cellular Signal Booster for Home · Ref. : HM106021
Price on request
Antennas
Hardware role for Antennas functionality.
911008
Omnidirectional Antennas
5.8 dBi fiberglass dipole antenna for LoRa 863-870 MHz
- White / N-Type to MHF
- 800 ± 10mm
- 360 degrees
Price on request
911004
Omnidirectional Antennas
3 dBi Fiberglass Omnidirectional Antenna for LoRa, N-Type · Ref. : 911004
- 360 degrees
- N-Type Male
- N-Type to MHF
Price on request
911007
Omnidirectional Antennas
5.8 dBi fiberglass dipole antenna for LoRa, white, 863-870 MHz
- 800 ± 10mm
- 360 degrees
- N-Type Male
Price on request
911003
Omnidirectional Antennas
3 dBi fiberglass omnidirectional antenna, N-Type male · Ref. : 911003
Price on request
Cables
Hardware role for Cables functionality.
920025
Antenna Cables and Pigtails
LMR195 Antenna Feeder Line 1.5 m, N-type Connectors
Price on request
920423
Antenna Cables and Pigtails
MHF to RP-SMA Female RF Coaxial Cable, 220 mm
- VBUS
- P0.21/UART1_DE
- P0.10/NFC2
Price on request
920214
Antenna Cables and Pigtails
MHF to SMA Female RF Coaxial Cable 100 mm
- VBUS
- P0.21/UART1_DE
- P0.10/NFC2
Price on request
920067
Antenna Cables and Pigtails
LMR195 Antenna Feeder Cable N Female to N Male 5 m · Ref. : 920067
Price on request
Frequently asked questions
How can I obtain a quotation for this hardware?
Submit your bill of materials or operational requirements to our engineers. Atlas provides a comprehensive quotation covering all hardware and support.
Is this hardware compliant with industrial standards?
Yes, all selected devices meet rigorous industrial standards for electromagnetic compatibility, temperature resilience, and electrical isolation.
Does Atlas provide integration support?
Our application engineers verify the technical coherence of your hardware architecture and advise you on selecting necessary wiring accessories.
What prerequisites are required for commissioning?
You must provide a regulated power source matching device specifications and establish an addressing plan for devices on the local network.
A project? Our engineers build the solution with you.
Send your requirements: Atlas proposes the architecture, the bill of materials and a quotation, then follows the supply.
Request a quotation






