Limited record: this part has neither specifications nor a datasheet in the catalog yet. It is shown for reference and is not indexed.

C2SR – Outdoor dual-frequency RFID reader IP65

Outdoor dual-frequency RFID reader IP65

HF and NFC Readers

  • RFID and NFC
Manufacturer part number
C2SR
Manufacturer
Anviz

The Anviz C2SR access control reader is an IP65 waterproof RFID card reader for outdoor installations, reading EM 125kHz and Mifare 13.56MHz cards with Wiegand output.

Product overview

Anviz C2SR, HF and NFC RFID reader for outdoor access control — The Anviz C2SR is an RFID card reader designed for outdoor access control, with an IP65 protection rating.

Identification. The reader supports dual-frequency cards for EM and Mifare cards. The read range is 0 to 5 cm, over 8 cm for 125kHz cards and over 2 cm for 13.56MHz cards. Identification time is below 80 ms, and an LED indicator is supported.

Interfaces. The Wiegand output allows connection to an access controller.

Power and environment. The reader operates on a 12 V DC supply. Its operating temperature range is -10 °C to 65 °C (14 °F to 140 °F) at 20% to 80% humidity. Its dimensions are 50 x 159 x 25 mm.

Typical uses. The C2SR suits outdoor gates, entrances and access points requiring a waterproof reader with Wiegand output.

Typical applications

Derived from the part category, not a compatibility statement.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Similar products

All HF and NFC Readers
Request a quote