DFR0024
DS18B20 Digital Temperature Sensor, Arduino Compatible

- Temperature range
- -55 °C ~ +125 °C
- Temperature Detection Range
- -55 ° C ~ +125 ° C (-67 ° F ~ +257 ° F)
- Interface
- Digital
- Supply voltage
- 3.3V to 5V
DS18B20 Digital Temperature Sensor, Arduino Compatible
DFRobot Gravity Sensor & Actuator System
DS18B20 digital temperature sensor from DFRobot, Arduino compatible, with digital output, for temperature measurement in prototypes and electronics projects.
Overview. The DFRobot DS18B20 is an Arduino compatible digital temperature sensor designed for prototypes and electronics projects where accuracy and reliability are required.
Main characteristics. The sensor performs digital temperature conversion and output, with a maximum resolution of 12 bits and an accuracy of up to ±0.5 °C. It features built-in EEPROM and a temperature limit setting.
Interfaces and connectivity. Communication uses an advanced single-bus data interface. Parasitic mode is available for two-wire operation.
Power and environment. The supply voltage ranges from 3.3 V to 5 V. The detection range extends from -55 °C to +125 °C (-67 °F to +257 °F). Size: 22 x 32 mm.
Typical uses. Temperature measurement in prototype assemblies, educational projects and temperature-dependent applications.
Integration. The sensor plugs directly into the DFRobot IO expansion shield; a digital cable is included.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for DFR0024, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| Supply voltage | 3.3V to 5V |
| Gravity | DS18B20 Temperature Sensor (Arduino Compatible) |
| Interface | Digital |
| Size | 22x32mm (0.87x1.26in) |
| Temperature Detection Range | -55 ° C ~ +125 ° C (-67 ° F ~ +257 ° F) |
| Temperature range | -55 °C ~ +125 °C |
No specification matches.
Last verification : 2026-11-02
Official documents and the technical data recorded for DFR0024. For a missing document or a specific revision, our experts send it to you.
DS18B20 digital temperature sensor from DFRobot, Arduino compatible, with digital output, for temperature measurement in prototypes and electronics projects.
| Parameter | Value |
|---|---|
| Supply voltage | 3.3V to 5V |
| Gravity | DS18B20 Temperature Sensor (Arduino Compatible) |
| Interface | Digital |
| Size | 22x32mm (0.87x1.26in) |
| Temperature Detection Range | -55 ° C ~ +125 ° C (-67 ° F ~ +257 ° F) |
| Temperature range | -55 °C ~ +125 °C |
Points to check before using DFR0024 in a design. They are derived from the recorded characteristics, not from the manufacturer's application circuits.
| Supply voltage | 3.3V to 5V |
Check the exact pin assignment and the application circuit in the datasheet, or ask our experts.
Answers to the questions that the recorded characteristics of DFR0024 can answer. A question is not asked when nothing is recorded to answer it.
3.3V to 5V (source: Supply voltage).
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
DS18B20 Digital Temperature Sensor, Arduino Compatible

Gravity: Digital Push Button (Blue)

Gravity: Digital Push Button (Green)

Gravity: GR10-30 Gesture Sensor (UART & I2C, 12 Gestures, 0~30cm)

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | DFR0024 |
| Manufacturer | DFRobot |
DFRobot Gravity Sensor & Actuator System
Dual bipolar stepper motor shield for Arduino with DRV8825 driver · Ref. : DRI0023
Price on request
DFRobot Gravity Sensor & Actuator System
Analog Piezo Disk Vibration Sensor · Ref. : DFR0052
Price on request
DFRobot Gravity Sensor & Actuator System
2x2A dual-channel motor shield for Arduino
Price on request
DFRobot Gravity Sensor & Actuator System
Expansion board for Raspberry Pi Pico and Pico 2 · Ref. : DFR0848
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details