DFR0052 – Analog Piezo Disk Vibration Sensor

Analog Piezo Disk Vibration Sensor

DFRobot Gravity Sensor & Actuator System

Manufacturer part number
DFR0052
Manufacturer
DFRobot

DFRobot DFR0052 piezoelectric disk vibration sensor measuring vibration strength through an analog voltage output, for direct reading by a microcontroller.

Product overview

Overview. The DFRobot DFR0052 is an analog piezoelectric disk vibration sensor from DFRobot's Gravity range. It measures the strength of vibration through an output voltage proportional to the vibration force, unlike digital sensors that only count events.

Main characteristics. The ceramic disk has a diameter of 15.0 ±0.2 mm and the brass metal plate measures 20.0 ±0.10 mm in diameter and 0.20 ±0.03 mm in thickness, for a total height of 0.42 ±0.05 mm. The module measures 22 x 30 mm. The main electrostatic capacity Cm is 15000 ±30% pF, the resonant frequency Fr is 6.5 ±0.7 KHz and the resonant impedance R is 300 Ω maximum. The insulation resistance is 100 MΩ minimum.

Interface and power. The sensor operates from a supply voltage of 3.3 V to 5 V and provides an analog interface, connected with the supplied analog cable. The maximum input voltage is 30 Vp-p. It is designed to be read directly by an Arduino board.

Environment. The operating temperature range is -20 °C to +70 °C, and the storage temperature range is -30 °C to +80 °C.

Typical uses. This sensor suits sensing and measuring vibrations and pressure applied to the piezoelectric unit, thanks to its analog output proportional to strength. Its standard footprint, with two 3 mm mounting holes spaced at multiples of 5 mm, simplifies mechanical integration.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote