DRI0023
Dual bipolar stepper motor shield for Arduino with DRV8825 driver

- Extended interfaces
- 6 analog I/O, 8 digital I/O, and I2C
- Input Voltage
- 8.2-45 VDC
- Output Current
- 1.6 A (Limited)
- Driving pin
- D4, D5, D6, D7, D8, D12
Dual bipolar stepper motor shield for Arduino with DRV8825 driver
DFRobot Gravity Sensor & Actuator System
Arduino expansion shield driving two bipolar stepper motors with the DRV8825 driver. It controls the motors with six digital pins and includes an XBee socket.
Overview. The DFRobot DRI0023 is an Arduino expansion shield for driving two bipolar stepper motors, built around the DRV8825 driver. It uses only six digital pins of the Arduino board (D4, D5, D6, D7, D8 and D12), leaving the other inputs free for sensors or communication modules.
Main characteristics. The DRV8825 driver offers full, 1/2, 1/4, 1/8, 1/16 and 1/32 microstep resolutions, set by code switches on the board for each motor channel. The input voltage is 8.2 to 45 VDC, the working voltage 3.3/5 V and the output current 1.6 A (limited). Dimensions are 83 × 55 × 25 mm for a weight of 48 g.
Interfaces and connectivity. An XBee-compatible socket allows a communication module to be added without an extra interface board. The board also provides 6 analog I/O, 8 digital I/O and an I2C interface for expansion, and screwless PC terminals simplify wiring.
Typical uses. This shield suits the control of positioning mechanisms, motion stages and automated systems, as well as robotics prototyping. It is compatible with Arduino UNO R3, Leonardo and Mega boards.
Available on quotation from Atlas Electronics.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for DRI0023, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| Dimension | 83 * 55 * 25 mm/3.26 * 2.16 * 0.98 inches |
| Driving pin | D4, D5, D6, D7, D8, D12 |
| Extended interfaces | 6 analog I/O, 8 digital I/O, and I2C |
| Gravity | Dual Bipolar Stepper Motor Shield for Arduino (DRV8825) |
| Input Voltage | 8.2-45 VDC |
| Microstep resolutions | full, 1/2, 1/4, 1, 8, 1/16, 1/32 |
| Output Current | 1.6 A (Limited) |
| Weight | 48 g |
| Working voltage | 3.3/5 V |
No specification matches.
Last verification : 2026-11-02
Official documents and the technical data recorded for DRI0023. For a missing document or a specific revision, our experts send it to you.
Arduino expansion shield driving two bipolar stepper motors with the DRV8825 driver. It controls the motors with six digital pins and includes an XBee socket.
| Parameter | Value |
|---|---|
| Dimension | 83 * 55 * 25 mm/3.26 * 2.16 * 0.98 inches |
| Driving pin | D4, D5, D6, D7, D8, D12 |
| Extended interfaces | 6 analog I/O, 8 digital I/O, and I2C |
| Gravity | Dual Bipolar Stepper Motor Shield for Arduino (DRV8825) |
| Input Voltage | 8.2-45 VDC |
| Microstep resolutions | full, 1/2, 1/4, 1, 8, 1/16, 1/32 |
| Output Current | 1.6 A (Limited) |
| Weight | 48 g |
| Working voltage | 3.3/5 V |
Answers to the questions that the recorded characteristics of DRI0023 can answer. A question is not asked when nothing is recorded to answer it.
Yes — recorded under "Extended interfaces": 6 analog I/O, 8 digital I/O, and I2C.
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
Dual bipolar stepper motor shield for Arduino with DRV8825 driver

Gravity: 1602 LCD Keypad Shield For Arduino

Gravity: Nano I/O Shield for Arduino Nano

Gravity: DS18B20 Temperature Sensor (Arduino Compatible)

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | DRI0023 |
| Manufacturer | DFRobot |
DFRobot Gravity Sensor & Actuator System
Analog Piezo Disk Vibration Sensor · Ref. : DFR0052
Price on request
DFRobot Gravity Sensor & Actuator System
2x2A dual-channel motor shield for Arduino
Price on request
DFRobot Gravity Sensor & Actuator System
Expansion board for Raspberry Pi Pico and Pico 2 · Ref. : DFR0848
Price on request
DFRobot Gravity Sensor & Actuator System
Analog Flame Sensor for Arduino · Ref. : DFR0076
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details