DFR0462
Flexible 8x32 RGB LED Matrix SK6812/WS2812 5V

- Operating Temperature
- -25 ~ +80 ℃
- Communication interface
- Gravity 3Pin interface
- Dimension
- 80*320 mm/3.15*12.60 inches
- LED Type
- SK6812/WS2812
Flexible 8x32 RGB LED Matrix SK6812/WS2812 5V
DFRobot Gravity Sensor & Actuator System
Flexible 8x32 RGB LED matrix from DFRobot for interactive displays, robotics visual feedback and embedded projects. Arduino compatible via Gravity 3-pin interface.
DFRobot DFR0462 flexible RGB LED matrix. This programmable 8x32 RGB LED matrix with SK6812/WS2812 LEDs is a large-format lighting board designed for interactive displays, robotics visual feedback and embedded electronics projects.
Main characteristics. It includes 256 LEDs arranged in an 8x32 grid, forming a continuous lighting surface suited to text scrolling and animations. The flexible PCB substrate allows installation on curved surfaces. Each pixel is individually addressable with 256 brightness levels per red, green and blue channel, giving up to 16,777,216 colours. The refresh rate exceeds 400 Hz.
Interfaces and connectivity. The module connects through a Gravity 3-pin interface and a pre-terminated cable for Arduino expansion. Control uses a single data line with an expandable cascade architecture.
Power and environment. Operating voltage of 5 V. Each LED draws a maximum of 18 mA; when several modules run simultaneously, an external power supply through the Servo Power port of a Gravity IO expansion board is recommended. Operating temperature range from -25 to +80 °C. Weight 188 g, dimensions 80 x 320 mm.
Typical uses. Decorative displays, robotics accessories, animated signage and visual indicators for embedded systems and creative programming environments.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for DFR0462, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| Communication interface | Gravity 3Pin interface |
| Dimension | 80*320 mm/3.15*12.60 inches |
| Gravity | Flexible 8x32 RGB LED Matrix (SK6812/WS2812, 5V) |
| LED Type | SK6812/WS2812 |
| Operating Temperature | -25 ~ +80 ℃ |
| Operating Voltage | 5V |
| Weight | 188g |
No specification matches.
Last verification : 2026-11-02
Official documents and the technical data recorded for DFR0462. For a missing document or a specific revision, our experts send it to you.
Flexible 8x32 RGB LED matrix from DFRobot for interactive displays, robotics visual feedback and embedded projects. Arduino compatible via Gravity 3-pin interface.
| Parameter | Value |
|---|---|
| Communication interface | Gravity 3Pin interface |
| Dimension | 80*320 mm/3.15*12.60 inches |
| Gravity | Flexible 8x32 RGB LED Matrix (SK6812/WS2812, 5V) |
| LED Type | SK6812/WS2812 |
| Operating Temperature | -25 ~ +80 ℃ |
| Operating Voltage | 5V |
| Weight | 188g |
Points to check before using DFR0462 in a design. They are derived from the recorded characteristics, not from the manufacturer's application circuits.
| Operating Voltage | 5V |
Check the exact pin assignment and the application circuit in the datasheet, or ask our experts.
Answers to the questions that the recorded characteristics of DFR0462 can answer. A question is not asked when nothing is recorded to answer it.
-25 ~ +80 ℃ (source: Operating Temperature).
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
Flexible 8x32 RGB LED Matrix SK6812/WS2812 5V

Gravity: Flexible 8x8 RGB LED Matrix

Gravity: Flexible 16x16 RGB LED Matrix

Gravity: I2C DS1307 RTC Module

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | DFR0462 |
| Manufacturer | DFRobot |
DFRobot Gravity Sensor & Actuator System
Dual bipolar stepper motor shield for Arduino with DRV8825 driver · Ref. : DRI0023
Price on request
DFRobot Gravity Sensor & Actuator System
Analog Piezo Disk Vibration Sensor · Ref. : DFR0052
Price on request
DFRobot Gravity Sensor & Actuator System
2x2A dual-channel motor shield for Arduino
Price on request
DFRobot Gravity Sensor & Actuator System
Expansion board for Raspberry Pi Pico and Pico 2 · Ref. : DFR0848
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details