DFR0469
I2C Real-Time Clock Module with Internal Battery

- Timing Range
- To 2099 (with leap year compensation)
- Dimension
- 35.50 * 22.00(mm)/1.4 * 0.87 inches
- Gravity
- I2C SD2405 RTC Module
- Low Power
- typical 1uA (inner battery, Ta=25°C)
I2C Real-Time Clock Module with Internal Battery
DFRobot Gravity Sensor & Actuator System
I2C real-time clock module SD2405AL with dual power supply and internal battery, for timekeeping, alarms and timing in embedded projects.
Overview. The DFRobot DFR0469 Gravity I2C SD2405 RTC module is an I2C real-time clock built around the SD2405AL circuit. It counts seconds, minutes, hours, day, date, month and year, with leap year compensation valid up to 2099.
Main characteristics. The module operates from 3.3 V to 5.5 V and typically consumes 1 µA on its internal battery at 25 °C. Accuracy is ±5 ppm from -40 °C to +85 °C. It provides three programmable alarms (year, month, date, day of the week, hour, minute, second), a countdown timer interrupt and a high precision time trimming circuit, with a selectable 12-hour or 24-hour display.
Interfaces and connectivity. The fast 400 kHz I2C interface allows direct connection to a microcontroller. A programmable square-wave output from 32768 Hz down to 1 Hz, including 4096 Hz and 1/16 Hz, provides a clock signal to an external MCU. A 12-byte general SRAM is available for data storage.
Power and environment. The dual power supply switches automatically from the primary supply to the internal battery when the primary voltage drops or is lost. The manufacturer indicates that the module can keep working for 5 to 8 years.
Typical uses. The module can act as a time-stamped data logger, a timer or alarm clock, and a time base for any project requiring reliable timekeeping.
Integration. The product ships with a Gravity I2C 4-pin sensor cable and a 5-pin XH2.54 header. Dimensions 35.5 × 22.0 mm, weight 6 g.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for DFR0469, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| Dimension | 35.50 * 22.00(mm)/1.4 * 0.87 inches |
| Gravity | I2C SD2405 RTC Module |
| Low Power | typical 1uA (inner battery, Ta=25°C) |
| Timing Range | To 2099 (with leap year compensation) |
| Weight | 6g |
No specification matches.
Last verification : 2026-11-02
Official documents and the technical data recorded for DFR0469. For a missing document or a specific revision, our experts send it to you.
I2C real-time clock module SD2405AL with dual power supply and internal battery, for timekeeping, alarms and timing in embedded projects.
| Parameter | Value |
|---|---|
| Dimension | 35.50 * 22.00(mm)/1.4 * 0.87 inches |
| Gravity | I2C SD2405 RTC Module |
| Low Power | typical 1uA (inner battery, Ta=25°C) |
| Timing Range | To 2099 (with leap year compensation) |
| Weight | 6g |
Answers to the questions that the recorded characteristics of DFR0469 can answer. A question is not asked when nothing is recorded to answer it.
Yes — recorded under "Gravity": I2C SD2405 RTC Module.
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
I2C Real-Time Clock Module with Internal Battery

Gravity: I2C DS1307 RTC Module

Gravity: 1602 LCD Keypad Shield For Arduino

Gravity: Nano I/O Shield for Arduino Nano

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | DFR0469 |
| Manufacturer | DFRobot |
DFRobot Gravity Sensor & Actuator System
Dual bipolar stepper motor shield for Arduino with DRV8825 driver · Ref. : DRI0023
Price on request
DFRobot Gravity Sensor & Actuator System
Analog Piezo Disk Vibration Sensor · Ref. : DFR0052
Price on request
DFRobot Gravity Sensor & Actuator System
2x2A dual-channel motor shield for Arduino
Price on request
DFRobot Gravity Sensor & Actuator System
Expansion board for Raspberry Pi Pico and Pico 2 · Ref. : DFR0848
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details