DFR0558
I2C High Temperature Sensor, K-Type Thermocouple, -270 to 1372 °C

- Temperature range
- -270°C~1372°C
- Interfaces
- Gravity I2C (Logic Level 0-3.3V)
- Input Voltage (VCC)
- 3.3V~5.5V
- Dimension
- 44.0mm*22.0mm
I2C High Temperature Sensor, K-Type Thermocouple, -270 to 1372 °C
DFRobot Gravity Sensor & Actuator System
DFRobot digital temperature sensor with K-type thermocouple and armored stainless steel probe, measuring up to 800 °C for flames, furnaces and pottery kilns.
DFRobot DFR0558. I2C high temperature sensor with K-type thermocouple, designed for measuring high temperatures, up to 1372 °C for the module.
Main characteristics. The conversion module uses a dedicated MAX31855K chip that amplifies the small thermocouple voltage, converts it to a digital signal and applies compensation. Resolution is 0.25 °C with 14-bit measurement. Error is within ±2 °C from -200 °C to 700 °C, and within ±4 °C from 700 °C to 1350 °C. The armored K-type probe measures up to 800 °C with an error of ±2.5 °C maximum.
Interfaces and connectivity. The module connects through a Gravity I2C interface with logic levels from 0 to 3.3 V. It is compatible with 3.3 V and 5 V controllers thanks to an input voltage of 3.3 V to 5.5 V. A 1.5 m Gravity-4P I2C/UART sensor wire is supplied.
Power and environment. The sensor operates from 3.3 V to 5.5 V. The probe, 50 mm long with a Φ4 mm diameter, is waterproof, corrosion resistant to weak acids or alkalis, and resistant to high temperatures. The module measures 44.0 mm × 22.0 mm.
Typical uses. The sensor suits measuring gas flame temperatures, electric furnaces, pottery kilns and high-power electric heaters, where a Pt100 probe is no longer adequate above 400 °C. It fits any K-type thermocouple probe.
Integration. The module connects directly to an Arduino UNO or a Raspberry Pi 3B following the manufacturer's wiring diagrams.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for DFR0558, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| Dimension | 44.0mm*22.0mm |
| Error | within ≤ ±2°C(-200°C~700°C) ~ ±4°C(700°C~1350°C) |
| Features | Waterproof, Corrosion Resistant (Weak Acid or Alkali Resistant, Rustproof), High Temperature Resistance |
| Gravity | I2C High Temperature Sensor (K-Type, 800℃) |
| Input Voltage (VCC) | 3.3V~5.5V |
| Interfaces | Gravity I2C (Logic Level 0-3.3V) |
| Probe | K Type Thermocouple |
| Probe diameter | Φ4mm |
| Probe length | 50mm |
| Resolution | 0.25 °C |
| Temperature range | -270°C~1372°C |
| Wire length | 1.5m |
No specification matches.
Last verification : 2026-11-02
Official documents and the technical data recorded for DFR0558. For a missing document or a specific revision, our experts send it to you.
DFRobot digital temperature sensor with K-type thermocouple and armored stainless steel probe, measuring up to 800 °C for flames, furnaces and pottery kilns.
| Parameter | Value |
|---|---|
| Dimension | 44.0mm*22.0mm |
| Error | within ≤ ±2°C(-200°C~700°C) ~ ±4°C(700°C~1350°C) |
| Features | Waterproof, Corrosion Resistant (Weak Acid or Alkali Resistant, Rustproof), High Temperature Resistance |
| Gravity | I2C High Temperature Sensor (K-Type, 800℃) |
| Input Voltage (VCC) | 3.3V~5.5V |
| Interfaces | Gravity I2C (Logic Level 0-3.3V) |
| Probe | K Type Thermocouple |
| Probe diameter | Φ4mm |
| Probe length | 50mm |
| Resolution | 0.25 °C |
| Temperature range | -270°C~1372°C |
| Wire length | 1.5m |
Answers to the questions that the recorded characteristics of DFR0558 can answer. A question is not asked when nothing is recorded to answer it.
Yes — recorded under "Gravity": I2C High Temperature Sensor (K-Type, 800℃).
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
I2C High Temperature Sensor, K-Type Thermocouple, -270 to 1372 °C

Gravity: UART & I2C NFC Module

Gravity: 1602 LCD Keypad Shield For Arduino

Gravity: Nano I/O Shield for Arduino Nano

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | DFR0558 |
| Manufacturer | DFRobot |
DFRobot Gravity Sensor & Actuator System
Dual bipolar stepper motor shield for Arduino with DRV8825 driver · Ref. : DRI0023
Price on request
DFRobot Gravity Sensor & Actuator System
Analog Piezo Disk Vibration Sensor · Ref. : DFR0052
Price on request
DFRobot Gravity Sensor & Actuator System
2x2A dual-channel motor shield for Arduino
Price on request
DFRobot Gravity Sensor & Actuator System
Expansion board for Raspberry Pi Pico and Pico 2 · Ref. : DFR0848
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details