DFRobot DFR0566 HAT that brings the IO ports of Raspberry Pi 5, 4B and 3B+ out to connect sensors and modules.
Sensor Interface External Power3.3V
Dimension65*56 mm/2.56*2.20”
Operating Voltage5V
PWM Port External Power6-12V
Product overview
Overview. The DFRobot DFR0566 IO expansion HAT is designed for Raspberry Pi 5, 4B and 3B+. It leads out all the IO ports of the Raspberry Pi, including digital, analog, PWM, I2C, UART, SPI and IIS ports, to simplify connecting sensors and modules.
Main characteristics. Operating voltage of 5 V. PWM port external power supply of 6 to 12 V. Sensor interface external power of 3.3 V. Dimensions 65 x 56 mm (2.56 x 2.20 inches).
Interfaces and connectivity. Digital, analog, PWM, I2C, UART, SPI and IIS ports of the Raspberry Pi brought out on the board. Compatible with the DFRobot Gravity Series of sensors, avoiding complicated wiring.
Power and environment. Raspberry Pi GPIO pins work with a maximum logic level of 3.3 V. The board supports sensors and modules with a 3.3 V power supply, as well as sensors and modules with a 5 V power supply and 3.3 V level. The PWM external power supply (6 to 12 V) allows controlling multiple servos.
Typical uses. Connecting Gravity sensors and modules to a Raspberry Pi, controlling multiple servos through the PWM port.
DFRobot DFR0566 HAT that brings the IO ports of Raspberry Pi 5, 4B and 3B+ out to connect sensors and modules.
Sensor Interface External Power3.3V
Dimension65*56 mm/2.56*2.20”
Operating Voltage5V
PWM Port External Power6-12V
2. Datasheet extract (recorded values)
Parameter
Value
Dimension
65*56 mm/2.56*2.20”
Operating Voltage
5V
PWM Port External Power
6-12V
Sensor Interface External Power
3.3V
Applications and use cases
Architectures in which DFR0566 can play a role, derived from its category. This is not a compatibility statement: check the specifications against your requirements.
A proprietary PLC locks the project into one vendor’s tools. Industrial controllers built on the Raspberry Pi Compute Module run Linux, Node-RED, Python or CODESYS on DIN rail, with I/O modules, an operator panel and a cellular router for remote access
Adding a mobile connection to a product means choosing a modem, a SIM and a way to manage both. A cellular modem or HAT, an IoT SIM and a router or gateway form one connectivity chain, managed from a single platform
To check
Countries and networks where the devices will operate
Data volume per device and per month
Network technology (LTE-M, NB-IoT, 4G, 5G) supported by the modem and the SIM
Not every vision task justifies an industrial vision system. A Raspberry Pi with a camera module and an expansion board runs simple detection and counting models at low cost, close to the scene
To check
Frame rate and model size the board can run
Lighting and lens for the scene
Enclosure and cooling for the installation
Associated system blocks
ComputeCameras
Need a complete solution?
Send a request for DFR0566 and the other parts of your project.
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
What is recorded about the regulatory status and the life of this part.
Regulatory compliance
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details