DFR0824 – Dual-channel RS485 expansion HAT for Raspberry Pi

Dual-channel RS485 expansion HAT for Raspberry Pi

Raspberry Pi Expansion HATs & Shields

  • 56×65mm/2.20×2.56”
  • diameter 2.5mm
  • 3.3V
  • red
Manufacturer part number
DFR0824
Manufacturer
DFRobot
Mounting Hole Size
diameter 2.5mm
Operating Voltage
3.3V

Expansion HAT with two isolated RS485 interfaces for Raspberry Pi 5, 4B and 3B+, designed for sensor networks and monitoring.

Product overview

Overview. The DFRobot DFR0824 is a dual-channel RS485 HAT designed for Raspberry Pi 5, 4B and 3B+. It mounts on the Raspberry Pi GPIO connector and adds two independent RS485 communication interfaces.

Main characteristics. The board uses a TP75176E RS485 transceiver and a CH432T serial chip. It operates at 3.3 V. Each channel has a 120 Ω terminal resistance and a 5.08 mm, 3-pin pluggable terminal block. Three indicators show power (red), RX reception (green) and TX transmission (blue).

Isolation and protection. The isolated transceiver provides electrical and signal isolation on each channel, improving data transmission reliability and anti-interference performance. Embedded protection circuits, including a lightning and surge protector, a TVS diode and power supply isolation, protect the Raspberry Pi board.

Typical uses. The board supports RS485 multi-drop communication and the Modbus protocol with master/slave addressing. It suits agricultural and warehouse Internet of Things applications, indoor and outdoor environmental monitoring, lighting control and security access control systems.

Integration. The kit includes four copper columns and screws to fix the board onto the Raspberry Pi. Board dimensions, package not included, are 56 × 65 mm, with mounting holes of 2.5 mm diameter.

See all specifications

Highlights

  • Dimension (Package Not Included): 56×65mm/2.20×2.56”
  • Mounting Hole Size: diameter 2.5mm
  • Operating Voltage: 3.3V
  • Power Indicator: red
  • RS485 Transceiver: TP75176E
  • RX Communication Indicator: green

Typical applications

Derived from the part category, not a compatibility statement.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote