SEN0294
Circular thin film force sensor 18.3 mm

- Operating Temperature
- -40℃~+85℃
- Pressure Measuring Range
- 20g~6kg
- Response time
- <10ms
- Activation Time
- <0.01S
Circular thin film force sensor 18.3 mm
DFRobot RP-C18.3-ST circular thin film force sensor, 18.3 mm in diameter, for highly sensitive detection of static and dynamic pressure, for example in pressure switches or bed monitoring systems.
Overview. The DFRobot RP-C18.3-ST circular force sensor (SEN0294) is a circular, flexible thin film pressure sensor with a diameter of 18.3 mm, enabling highly sensitive detection of pressure. It is designed to sense both static and dynamic pressure at a high response speed.
Operating principle. The sensor uses an ultra-thin film with excellent mechanical properties, excellent conductive materials and nanometre pressure sensitive layers. When pressure is applied to the active area, the disconnected circuit of the lower layer is connected through the pressure sensitive layer of the upper layer, converting pressure into resistance. The output resistance decreases as pressure increases.
Main characteristics. Thickness of 0.4 mm, pressure measuring range of 20 g to 6 kg, trigger force of 20 g (default resistance below 200 kΩ), initial resistance above 10 MΩ, activation time below 0.01 s and response time below 10 ms. Hysteresis is +10% at a 1000 g force and drift is below 5% under a 2.5 kg force with static load for 24 h. Lifespan is more than 1 million times.
Power and environment. Operating temperature from -40 °C to +85 °C. The sensor does not generate EDS or EMI.
Typical uses. Pressure switches, bed monitoring systems, intelligent sneakers and medical device systems, as described by the manufacturer.
Integration. The sensor is fitted with short legs, which simplifies integration into test setups and prototypes.
The RP-C18.3-ST is available on quotation from Atlas Electronics.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for SEN0294, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| Response time | <10ms |
| Activation Time | <0.01S |
| Circular Force Sensor (Diameter | 18.3mm, 20g-6kg, Thickness: 0.4mm) |
| Drift | <5%, 2.5Kg Force, Static load 24H |
| EDS | Not generate |
| EMI | Not generate |
| Hysteresis | +10%,(RF+ -RF-)/FR+,1000g Force |
| Initial Resistance | >10MΩ |
| Lifespan | >1million times |
| Operating Temperature | -40℃~+85℃ |
| Pressure Measuring Range | 20g~6kg |
| Thickness | 0.4mm |
| Trigger Force | 20g, triggered (default resistance<200kΩ) |
No specification matches.
Last verification : 2026-11-02
Official documents and the technical data recorded for SEN0294. For a missing document or a specific revision, our experts send it to you.
DFRobot RP-C18.3-ST circular thin film force sensor, 18.3 mm in diameter, for highly sensitive detection of static and dynamic pressure, for example in pressure switches or bed monitoring systems.
| Parameter | Value |
|---|---|
| Response time | <10ms |
| Activation Time | <0.01S |
| Circular Force Sensor (Diameter | 18.3mm, 20g-6kg, Thickness: 0.4mm) |
| Drift | <5%, 2.5Kg Force, Static load 24H |
| EDS | Not generate |
| EMI | Not generate |
| Hysteresis | +10%,(RF+ -RF-)/FR+,1000g Force |
| Initial Resistance | >10MΩ |
| Lifespan | >1million times |
| Operating Temperature | -40℃~+85℃ |
| Pressure Measuring Range | 20g~6kg |
| Thickness | 0.4mm |
| Trigger Force | 20g, triggered (default resistance<200kΩ) |
Points to check before using SEN0294 in a design. They are derived from the recorded characteristics, not from the manufacturer's application circuits.
Answers to the questions that the recorded characteristics of SEN0294 can answer. A question is not asked when nothing is recorded to answer it.
-40℃~+85℃ (source: Operating Temperature).
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
Circular thin film force sensor 18.3 mm

Pressure Sensor Strip (170mm, 20g-10kg)

RP-L-400 Thin Film Pressure Sensor Strip (400mm, 20g-10kg)

Circular Thin Film Force Sensor with Extended Leads (7.6mm, 30g-1.5kg, 0.3mm)

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | SEN0294 |
| Manufacturer | DFRobot |
Pressure Sensor Modules
LoRaWAN pressure sensor, SS316 transducer · Ref. : LORAWAN-PRESSURE-SENSOR
Price on request
Pressure Sensor Modules
High pressure sensor with digital I²C output · Ref. : MPM283I
Price on request
Pressure Sensor Modules
Thin film hydraulic pressure sensor 0-5 to 2000 bar · Ref. : HPT906
Price on request
Pressure Sensor Modules
Zigbee temperature, humidity and air pressure sensor · Ref. : 6979033600706
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details