RP-L-400 – Thin Film Pressure Sensor Strip 400 mm Flexible

Thin Film Pressure Sensor Strip 400 mm Flexible

Pressure Sensor Modules

  • -40℃~+85℃
  • 20g~10kg or larger
  • <10ms
  • <0.01S
Manufacturer part number
SEN0299
Manufacturer
DFRobot
Operating Temperature
-40℃~+85℃
Pressure Measuring Range
20g~10kg or larger

Flexible thin film pressure sensor strip, 400 mm long, designed for distributed force detection over large surfaces, for both static and dynamic pressure measurement.

Product overview

Overview. The DFRobot RP-L-400 is a 400 mm thin film pressure sensor strip, reference SEN0299. It converts applied force into a resistance change for simple analog measurement. Its elongated sensing area allows distributed force detection where point sensors fall short.

Main characteristics. Measuring range of 20 g to 10 kg or larger, trigger force below 20 g, initial resistance above 10 MΩ, thickness of 0.35 mm. Response time is below 10 ms and activation time below 0.01 s. Drift is below 5 % under a 2.5 kg static load for 24 h, and hysteresis is +10 % at 1000 g.

Interfaces and environment. The sensor is a resistive analog element and does not generate EDS or EMI. Its operating temperature range is -40 ℃ to +85 ℃. Its lifespan exceeds one million actuations.

Typical uses. Bed occupancy detection, gait monitoring inside footwear, distributed force sensing on seats, cushions or structural surfaces, static load monitoring and dynamic pressure measurement up to 10 Hz.

Integration. Ultra-thin film structure with conductive circuits and a nanometre pressure-sensitive layer, laminated with double-sided adhesive. The strip bends and can be mounted on curved or flexible surfaces. The product is available on quotation from Atlas Electronics.

See all specifications

Highlights

  • Response time: <10ms
  • Activation Time: <0.01S
  • Drift: <5%, 2.5Kg Force, Static load 24H
  • EDS: Not generate
  • EMI: Not generate
  • Hysteresis: +10%,(RF+ -RF-)/FR+,1000g Force

Good to know before integrating

  • Thermal: rated operating range -40℃~+85℃ — check it against the installation environment.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Similar products

All Pressure Sensor Modules
Request a quote