SEN0502
360° Rotary Encoder Module with I2C Output and LED

- Operating Temperature
- -30℃~+80℃
- Interface
- two Gravity connectors; I2C
- Storage
- 0~1023
- Accuracy
- 1~51
360° Rotary Encoder Module with I2C Output and LED
DFRobot Gravity Sensor & Actuator System
DFRobot Gravity rotary encoder module with 360° rotation and I2C output, featuring LED visual feedback, for adjusting parameters in microcontroller projects.
Overview. The DFRobot Gravity SEN0502 is an I2C rotary encoder module with 360° rotation for adjusting parameters in electronic projects. It combines a tactile knob with LEDs that show the current value.
Main characteristics. The module delivers 20 pulses per revolution and has a total rotating angle of 360°. Its rotation lifespan is 30000±200 cycles. The programmable step setting ranges from 1 to 51: at 1, about 2.5 turns advance the LED indication by one light; at 51, one detent advances one light. Forward rotation increases the reported value and reverse rotation decreases it.
Interfaces and connectivity. The module provides two Gravity connectors and an I2C output. A switch selects one of four I2C addresses, allowing up to four modules to be cascaded on one bus. The storage value range is 0 to 1023.
Power and environment. The operating voltage ranges from 3.3V to 5V. The operating temperature ranges from -30℃ to +80℃. The insulation impedance is 100MΩ above. The module measures 37 × 37 mm.
Typical uses. This module suits adjusting brightness, volume or speed, and controlling several independent parameters on one bus, for example the red, green and blue components of an RGB lighting project.
Integration. Three modules can share one I2C bus to form a compact control panel. The module is available on quotation from Atlas Electronics.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for SEN0502, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| Accuracy | 1~51 |
| Cascadable Device Number | 4 |
| Dimension | 37*37mm/1.46*1.46” |
| Gravity | 360 Degree Rotary Encoder Module (I2C) |
| I2C output | forward rotation increases values, reverse rotation decreases values |
| Insulation Impedance | 100MΩ above |
| Interface | two Gravity connectors; I2C |
| Maximum Settable Value | 51(Light up one LED when rotating 1 detent) |
| Minimum Settable Value | 1(Light up one LED when rotating 2.5 turns) |
| Operating Temperature | -30℃~+80℃ |
| Operating Voltage | 3.3V~5V |
| Oscillation | <10ms press |
| Pulses Per Revolution | 20 |
| Rotation Lifespan | 30000±200 Cycles |
| Storage | 0~1023 |
| Total Rotating Angle | 360° |
No specification matches.
Last verification : 2026-11-02
Official documents and the technical data recorded for SEN0502. For a missing document or a specific revision, our experts send it to you.
DFRobot Gravity rotary encoder module with 360° rotation and I2C output, featuring LED visual feedback, for adjusting parameters in microcontroller projects.
| Parameter | Value |
|---|---|
| Accuracy | 1~51 |
| Cascadable Device Number | 4 |
| Dimension | 37*37mm/1.46*1.46” |
| Gravity | 360 Degree Rotary Encoder Module (I2C) |
| I2C output | forward rotation increases values, reverse rotation decreases values |
| Insulation Impedance | 100MΩ above |
| Interface | two Gravity connectors; I2C |
| Maximum Settable Value | 51(Light up one LED when rotating 1 detent) |
| Minimum Settable Value | 1(Light up one LED when rotating 2.5 turns) |
| Operating Temperature | -30℃~+80℃ |
| Operating Voltage | 3.3V~5V |
| Oscillation | <10ms press |
| Pulses Per Revolution | 20 |
| Rotation Lifespan | 30000±200 Cycles |
| Storage | 0~1023 |
| Total Rotating Angle | 360° |
Points to check before using SEN0502 in a design. They are derived from the recorded characteristics, not from the manufacturer's application circuits.
| Operating Voltage | 3.3V~5V |
Check the exact pin assignment and the application circuit in the datasheet, or ask our experts.
Answers to the questions that the recorded characteristics of SEN0502 can answer. A question is not asked when nothing is recorded to answer it.
Yes — recorded under "Gravity": 360 Degree Rotary Encoder Module (I2C).
-30℃~+80℃ (source: Operating Temperature).
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
360° Rotary Encoder Module with I2C Output and LED

Gravity: 2-Channel I2C DAC Module (0-10V)

Gravity: 1602 LCD Keypad Shield For Arduino

Gravity: Nano I/O Shield for Arduino Nano

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | SEN0502 |
| Manufacturer | DFRobot |
DFRobot Gravity Sensor & Actuator System
Dual bipolar stepper motor shield for Arduino with DRV8825 driver · Ref. : DRI0023
Price on request
DFRobot Gravity Sensor & Actuator System
Analog Piezo Disk Vibration Sensor · Ref. : DFR0052
Price on request
DFRobot Gravity Sensor & Actuator System
2x2A dual-channel motor shield for Arduino
Price on request
DFRobot Gravity Sensor & Actuator System
Expansion board for Raspberry Pi Pico and Pico 2 · Ref. : DFR0848
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details