SEN0567
Low-Power MEMS Ammonia Gas Sensor, 1-300 ppm

- Operating Temperature
- -10-50℃
- Detection range
- 1-300ppm
- Operating Current
- <20mA
- Dimension
- 13×13 x 2.5mm/0.0.51×0.51x0.1"
Low-Power MEMS Ammonia Gas Sensor, 1-300 ppm
The SEN0567 is a MEMS ammonia (NH3) gas detector in breakout module form, designed for qualitative monitoring of ammonia leaks up to 300 ppm.
Overview. The DFRobot SEN0567 is a MEMS NH3 ammonia gas sensor supplied as a breakout module. It detects ammonia in a range of 1 to 300 ppm and provides an analog voltage output signal.
Main characteristics. The sensor has a sensitivity R0 (in air) / Rs (in 50 ppm NH3) greater than or equal to 3. Its dimensions are 13 × 13 × 2.5 mm, and its lifespan is at least 5 years in air. Preheating time is minimal.
Power and consumption. It operates from 3.3 to 5 V with an operating current below 20 mA, making it a low-power option suited to portable systems and IoT devices.
Environmental conditions. The operating temperature range is -10 to 50 °C and the operating humidity range is 15 to 90 %RH, non-condensing.
Typical uses. The sensor suits ammonia leak detection in cold storage, risk control in aquaculture and toilet odor monitoring.
Integration. It integrates into portable detectors and connected safety systems. This sensor performs qualitative measurements only; for quantitative measurements, the manufacturer points to its calibrated Gravity NH3 sensor. It must not be used in systems involving personal safety.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for SEN0567, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| Detection range | 1-300ppm |
| Dimension | 13×13 x 2.5mm/0.0.51×0.51x0.1" |
| Fermion | NH3 Gas Sensor – Ammonia Detector (Breakout, 1-300ppm, MEMS, Low Power) |
| Gas detected | Ammonia (NH3) |
| Lifespan | ≥5 years (in air) |
| Operating Current | <20mA |
| Operating Humidity | 15-90%RH (non-condensing) |
| Operating Temperature | -10-50℃ |
| Operating Voltage | 3.3-5V |
| Output signal | Analog voltage |
| Sensitivity | R0(in air)/Rs(in 50ppm NH3) ≥ 3 |
No specification matches.
Last verification : 2026-11-02
Official documents and the technical data recorded for SEN0567. For a missing document or a specific revision, our experts send it to you.
The SEN0567 is a MEMS ammonia (NH3) gas detector in breakout module form, designed for qualitative monitoring of ammonia leaks up to 300 ppm.
| Parameter | Value |
|---|---|
| Detection range | 1-300ppm |
| Dimension | 13×13 x 2.5mm/0.0.51×0.51x0.1" |
| Fermion | NH3 Gas Sensor – Ammonia Detector (Breakout, 1-300ppm, MEMS, Low Power) |
| Gas detected | Ammonia (NH3) |
| Lifespan | ≥5 years (in air) |
| Operating Current | <20mA |
| Operating Humidity | 15-90%RH (non-condensing) |
| Operating Temperature | -10-50℃ |
| Operating Voltage | 3.3-5V |
| Output signal | Analog voltage |
| Sensitivity | R0(in air)/Rs(in 50ppm NH3) ≥ 3 |
Points to check before using SEN0567 in a design. They are derived from the recorded characteristics, not from the manufacturer's application circuits.
| Operating Current | <20mA |
| Operating Voltage | 3.3-5V |
Check the exact pin assignment and the application circuit in the datasheet, or ask our experts.
Answers to the questions that the recorded characteristics of SEN0567 can answer. A question is not asked when nothing is recorded to answer it.
-10-50℃ (source: Operating Temperature).
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
Low-Power MEMS Ammonia Gas Sensor, 1-300 ppm

MEMS NH3 Gas Sensor

Industrial-grade MODBUS RS485 NH3 Sensor - with Waterproof Aviation Connector

SS316 LPG Mass Flow Meter Ammonia Gas 1.6Mpa 10A 220V Thermal Mass Air Flow Meter

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | SEN0567 |
| Manufacturer | DFRobot |
Ammonia Sensors
Ammonia NH3 Gas Detector with 4-20 mA Output · Ref. : FX-NH3
Price on request
Ammonia Sensors
Industrial MODBUS-RTU RS485 ammonia sensor IP65 · Ref. : 101990862
Price on request
Ammonia Sensors
MICS6814 3-in-1 gas sensor breakout (CO, NO2, NH3), I2C · Ref. : PIM569
Price on request
Ammonia Sensors
Industrial online NH3-N ammonia nitrogen analyzer · Ref. : NHNG-3010
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details