SEN0571
MEMS Odor and Gas Detection Sensor (0.5-50 ppm)

- Operating Temperature
- -10-50℃
- Detection range
- 0.5-50ppm
- Operating Current
- <20mA
- Dimension
- 13×13 x 2.5mm/0.0.51×0.51x0.1"
MEMS Odor and Gas Detection Sensor (0.5-50 ppm)
Educational STEM Coding & Sensor Starter Packs
The DFRobot SEN0571 MEMS sensor qualitatively detects odor gases such as H2S and EtOH over a 0.5 to 50 ppm range, with an analog voltage output.
DFRobot SEN0571 MEMS sensor. The DFRobot SEN0571 is a MEMS gas sensor, supplied as a breakout board, for detecting odor gases over a 0.5 to 50 ppm range.
Main characteristics. The sensor measures 13 × 13 × 2.5 mm and detects gases including H2S, EtOH and acetone. Its sensitivity R0 (in air) / Rs (in 5 ppm H2S) is greater than or equal to 2. It performs qualitative measurements only; the manufacturer points to its Gravity factory-calibrated electrochemical gas sensor series for quantitative measurements.
Power and environment. The operating voltage is 3.3 to 5 V, with an operating current below 20 mA. It operates from -10 to 50 °C at 15 to 90 %RH, non-condensing. Its lifespan is at least 5 years in air.
Output and integration. The output signal is an analog voltage, allowing direct reading by a microcontroller board such as an Arduino UNO, following the wiring diagram provided by the manufacturer.
Typical uses. The manufacturer cites body odor detection, spoiled food detection, aviation safety and health applications. The sensor should not be used in systems involving personal safety, and must be protected from volatile silicon compounds and corrosive gases.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for SEN0571, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| Detection range | 0.5-50ppm |
| Dimension | 13×13 x 2.5mm/0.0.51×0.51x0.1" |
| Fermion | MEMS Odor Smell Gas Detection Sensor (Breakout, 0.5-50ppm) |
| Gas detected | H2S, EtOH, acetone, etc |
| Lifespan | ≥5 years (in air) |
| Operating Current | <20mA |
| Operating Humidity | 15-90%RH (non-condensing) |
| Operating Temperature | -10-50℃ |
| Operating Voltage | 3.3-5V |
| Output signal | Analog voltage |
| Sensitivity | R0(in air)/Rs(in 5ppm H2S) ≥ 2 |
No specification matches.
Last verification : 2026-11-02
Official documents and the technical data recorded for SEN0571. For a missing document or a specific revision, our experts send it to you.
The DFRobot SEN0571 MEMS sensor qualitatively detects odor gases such as H2S and EtOH over a 0.5 to 50 ppm range, with an analog voltage output.
| Parameter | Value |
|---|---|
| Detection range | 0.5-50ppm |
| Dimension | 13×13 x 2.5mm/0.0.51×0.51x0.1" |
| Fermion | MEMS Odor Smell Gas Detection Sensor (Breakout, 0.5-50ppm) |
| Gas detected | H2S, EtOH, acetone, etc |
| Lifespan | ≥5 years (in air) |
| Operating Current | <20mA |
| Operating Humidity | 15-90%RH (non-condensing) |
| Operating Temperature | -10-50℃ |
| Operating Voltage | 3.3-5V |
| Output signal | Analog voltage |
| Sensitivity | R0(in air)/Rs(in 5ppm H2S) ≥ 2 |
Points to check before using SEN0571 in a design. They are derived from the recorded characteristics, not from the manufacturer's application circuits.
| Operating Current | <20mA |
| Operating Voltage | 3.3-5V |
Check the exact pin assignment and the application circuit in the datasheet, or ask our experts.
Answers to the questions that the recorded characteristics of SEN0571 can answer. A question is not asked when nothing is recorded to answer it.
-10-50℃ (source: Operating Temperature).
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
MEMS Odor and Gas Detection Sensor (0.5-50 ppm)

Fermion: MEMS Hydrogen H2 Gas Detection Sensor (Breakout, 0.1-1000ppm)

Fermion: MEMS Carbon Monoxide CO Gas Detection Sensor (Breakout, 5-5000ppm)

5pcs 1.5V-6V Type Miniature DC Motors

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | SEN0571 |
| Manufacturer | DFRobot |
Educational STEM Coding & Sensor Starter Packs
5 V Power Booster and Charger Module for Single-Cell Lithium Battery · Ref. : DFR0446
Price on request
Educational STEM Coding & Sensor Starter Packs
30 kg·cm magnetic encoder bus servo 360° · Ref. : 21100250
Price on request
Educational STEM Coding & Sensor Starter Packs
ROS2 Omnidirectional Mecanum Wheel Mobile Robot · Ref. : 3000200901
Price on request
Educational STEM Coding & Sensor Starter Packs
ESP32 robot chassis expansion shield
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details