SEN0661
Electrochemical HCHO formaldehyde sensor 0-2000 ppb

- Operating Temperature
- 0~50℃
- Formaldehyde measurement range
- 0~2000ppb
- Supply voltage
- 3.3–5V
- Operating Current
- 80μA(Average@2Hz), 2mA(peak)
Electrochemical HCHO formaldehyde sensor 0-2000 ppb
DFRobot Gravity Sensor & Actuator System
Electrochemical formaldehyde (HCHO) measurement module for indoor air quality monitoring, 0-2000 ppb range, with integrated SHT4x temperature and humidity sensing and a Gravity I2C interface.
Sensor DFRobot SEN0661. The Gravity: SFA40 Formaldehyde (HCHO) Sensor is an electrochemical formaldehyde detection module based on the Sensirion SFA40 chip, designed to measure HCHO concentrations from 0 to 2000 ppb with an accuracy of ±20 ppb.
Main characteristics. The module has a detection threshold of 20 ppb, an ethanol cross-sensitivity below 0.3% (15 ppb output in 5 ppm ethanol) and a long-term drift below 5 ppb or 5% of the measured value per year, whichever is larger. The response time is under 2 minutes, the startup time after power-on is 10 minutes and the stated lifetime exceeds 6 years.
Interfaces and connectivity. The sensor uses a Gravity I2C interface compatible with Arduino platforms and other development boards. It integrates an SHT4x temperature and humidity sensor allowing automatic environmental compensation of the measurements.
Power and environment. The supply voltage is 3.3 to 5 V. The operating current is 80 μA on average at 2 Hz and 2 mA peak. The module operates between 0 and 50 °C and between 10 and 90% relative humidity, with dimensions of 32 × 22 mm.
Typical uses. This module suits indoor air quality monitoring, HVAC monitoring systems, smart home projects and experimental air quality instrumentation.
Integration. Thanks to its I2C interface and Arduino compatibility, the sensor connects directly to development boards and data acquisition systems.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for SEN0661, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| Supply voltage | 3.3–5V |
| Response time | <2min |
| Cross-sensitivity to ethanol | 0.3%(15ppb output in 5ppm ethanol) |
| Formaldehyde measurement range | 0~2000ppb |
| Gravity | SFA40 Formaldehyde (HCHO) Sensor (0-2000ppb, ±20ppb Accuracy) |
| Lifttime | > 6years |
| Long-term Drift | <5ppb or <5% of the measured value, whichever is larger per year |
| Operating Current | 80μA(Average@2Hz), 2mA(peak) |
| Operating Humidity | 10~90%R.H |
| Operating Temperature | 0~50℃ |
| Size | 32 * 22mm |
| Startup time after power on | 10min |
| Typical accuracy | ±20ppb or ±20% m.v (@0~200ppb measurement range) |
No specification matches.
Last verification : 2026-11-02
Official documents and the technical data recorded for SEN0661. For a missing document or a specific revision, our experts send it to you.
Electrochemical formaldehyde (HCHO) measurement module for indoor air quality monitoring, 0-2000 ppb range, with integrated SHT4x temperature and humidity sensing and a Gravity I2C interface.
| Parameter | Value |
|---|---|
| Supply voltage | 3.3–5V |
| Response time | <2min |
| Cross-sensitivity to ethanol | 0.3%(15ppb output in 5ppm ethanol) |
| Formaldehyde measurement range | 0~2000ppb |
| Gravity | SFA40 Formaldehyde (HCHO) Sensor (0-2000ppb, ±20ppb Accuracy) |
| Lifttime | > 6years |
| Long-term Drift | <5ppb or <5% of the measured value, whichever is larger per year |
| Operating Current | 80μA(Average@2Hz), 2mA(peak) |
| Operating Humidity | 10~90%R.H |
| Operating Temperature | 0~50℃ |
| Size | 32 * 22mm |
| Startup time after power on | 10min |
| Typical accuracy | ±20ppb or ±20% m.v (@0~200ppb measurement range) |
Points to check before using SEN0661 in a design. They are derived from the recorded characteristics, not from the manufacturer's application circuits.
| Supply voltage | 3.3–5V |
| Operating Current | 80μA(Average@2Hz), 2mA(peak) |
| Startup time after power on | 10min |
Check the exact pin assignment and the application circuit in the datasheet, or ask our experts.
Answers to the questions that the recorded characteristics of SEN0661 can answer. A question is not asked when nothing is recorded to answer it.
3.3–5V (source: Supply voltage).
0~50℃ (source: Operating Temperature).
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
Electrochemical HCHO formaldehyde sensor 0-2000 ppb

Gravity: PAV3015 Air Velocity Sensor (0-15 m/s, I2C)

Gravity: 1602 LCD Keypad Shield For Arduino

Gravity: Nano I/O Shield for Arduino Nano

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | SEN0661 |
| Manufacturer | DFRobot |
DFRobot Gravity Sensor & Actuator System
Dual bipolar stepper motor shield for Arduino with DRV8825 driver · Ref. : DRI0023
Price on request
DFRobot Gravity Sensor & Actuator System
Analog Piezo Disk Vibration Sensor · Ref. : DFR0052
Price on request
DFRobot Gravity Sensor & Actuator System
2x2A dual-channel motor shield for Arduino
Price on request
DFRobot Gravity Sensor & Actuator System
Expansion board for Raspberry Pi Pico and Pico 2 · Ref. : DFR0848
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details