MODEL 8124 – AC 1000 A voltage-output clamp meter

AC 1000 A voltage-output clamp meter

Clamp Meters

  • AC 1000A
  • Approx. 3m
  • Ø 68mm
  • MINI DIN 6PIN
Manufacturer part number
MODEL_8124
Manufacturer
Kyoritsu
Rated Current
AC 1000A
Output voltage
AC 500mV/1000A (AC 0.5mV/A)

Kyoritsu MODEL 8124 clamp meter for AC current measurement up to 1000 A, with a voltage output of 500 mV at 1000 A. Conductor capacity of 68 mm diameter.

Product overview

Kyoritsu MODEL 8124, clamp meter for AC current measurement up to 1000 A — This clamp meter from manufacturer Kyoritsu, model MODEL 8124, measures alternating current on conductors up to 68 mm in diameter without interrupting the circuit.

Main characteristics. Rated current AC 1000 A, with a voltage output of AC 500 mV at 1000 A (0.5 mV/A). Accuracy of ±0.5%rdg ±0.2 mV at 50/60 Hz, and ±1.5%rdg ±0.4 mV from 40 Hz to 1 kHz. Phase shift within ±1.0° from 45 to 65 Hz. Output impedance of approximately 1 Ω.

Interfaces and connectivity. Output through a MINI DIN 6-pin connector, cable of approximately 3 m. Supplied accessories: carrying case 9094, instruction manual and cable markers. Optional accessories: test leads 7146 (banana Ø4 mm plug adapter) and extension cable 7185.

Power and environment. Operating temperature range 0 to 50 °C, relative humidity 85% or less, no condensation. Dimensions 186 x 129 x 53 mm, weight approximately 510 g.

Safety and compliance. Compliant with IEC 61010-1, IEC 61010-2-032 and IEC 61326 standards, CAT III 600 V, pollution degree 2.

Typical uses. AC current measurement on electrical installations and switchboards, with a voltage output allowing connection to a compatible measuring or recording instrument.

Available on quotation from Atlas Electronics.

See all specifications

Highlights

  • Output voltage: AC 500mV/1000A (AC 0.5mV/A)
  • Cable Length: Approx. 3m
  • Dimension: 186(L) x 129(W) x 53(D) mm
  • Operating temperature and humidity range: 0 to 50˚C, relative humidity 85% or less (no condensation)
  • Output Connector:: MINI DIN 6PIN
  • Output Impedance: Approx. 1&Omega

Good to know before integrating

  • Thermal: rated operating range 0 to 50˚C, relative humidity 85% or less (no condensation) — check it against the installation environment.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Similar products

All Clamp Meters
Request a quote