MODEL 8143 – AC 1000 A clamp meter with voltage output, Ø 68 mm jaws

AC 1000 A clamp meter with voltage output, Ø 68 mm jaws

Clamp Meters

  • AC 1000mA
  • Approx. 2m
  • Ø 68mm
  • MINI DIN 6pin
Manufacturer part number
MODEL_8143
Manufacturer
Kyoritsu
Rated Current
AC 1000mA
Output voltage
AC 100mV/1000mA (AC 100mV/A)

The Kyoritsu MODEL 8143 is an AC clamp meter with voltage output, measuring up to 1000 A AC on conductors of Ø 68 mm for alternating current measurement.

Product overview

Overview. The Kyoritsu MODEL 8143 is a voltage-output clamp meter manufactured by Kyoritsu, designed for alternating current measurement up to 1000 A AC.

Main characteristics. The jaw accepts conductors of Ø 68 mm. The output delivers 100 mV per ampere (AC 100 mV/A), with an output impedance of approximately 120 Ω. Accuracy is ±1.0% of reading ±0.1 mV at 50/60 Hz and ±2.0% of reading ±0.1 mV between 40 Hz and 1 kHz.

Interfaces and connectivity. The output uses a MINI DIN 6-pin connector, with a cable of approximately 2 m. Optional accessories include the 7146 banana Ø 4 mm adapter plug and the 7185 extension cable.

Power and environment. Operating temperature range 0 to 50 °C, humidity less than 85% RH without condensation. Dimensions 186 x 129 x 53 mm, weight approximately 490 g.

Standards. Compliant with IEC 61010-1 and IEC 61010-2-032, CAT III 300 V, pollution degree 2.

Typical uses. AC current measurement on a conductor with a voltage signal output usable by an acquisition system or external instrument. This product cannot be used for power measurement. Discontinued product, available on quotation.

See all specifications

Highlights

  • Output voltage: AC 100mV/1000mA (AC 100mV/A)
  • Accessories: 9094 (Portable case), Instruction manual
  • Accuracy: ±1.0%rdg±0.1mV (50/60Hz) ±2.0%rdg±0.1mV (40Hz - 1kHz)
  • Applicable Standards: IEC 61010-1, IEC 61010-2-032, CAT III 300V pollution degree 2
  • Cable Length: Approx. 2m
  • Dimension: 186(L) x 129(W) x 53(D) mm

Good to know before integrating

  • Thermal: rated operating range 0 - 50º C, less than 85% RH (without condensation) — check it against the installation environment.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Similar products

All Clamp Meters
Request a quote