MODEL 8142 – AC clamp meter with voltage output, Ø40 mm

AC clamp meter with voltage output, Ø40 mm

Clamp Meters

  • AC 1000mA
  • Approx. 2m
  • Ø 40mm
  • MINI DIN 6pin
Manufacturer part number
MODEL_8142
Manufacturer
Kyoritsu
Rated Current
AC 1000mA
Output voltage
AC 100mV/1000mA (AC 100mV/A)

Kyoritsu MODEL 8142 AC clamp meter with 100 mV/A AC voltage output, designed to be connected to an external measuring instrument for alternating current measurement.

Product overview

Overview. The Kyoritsu MODEL 8142 is an AC current clamp meter with voltage output, part of the clamp meter category. It delivers an output signal of 100 mV per ampere over a rated current of 1000 A.

Main characteristics. The jaw opening is Ø40 mm, allowing conductors of large cross-section to be clamped. Accuracy is ±1.0% of reading ±0.1 mV at 50/60 Hz and ±2.0% of reading ±0.1 mV from 40 Hz to 1 kHz. Output impedance is approximately 200 Ω.

Interfaces and connectivity. The output uses a MINI DIN 6-pin connector, with a cable of approximately 2 m. The 7146 adapter (Ø4 banana plug) and the 7185 extension cable are available as options.

Power and environment. The clamp operates between 0 and 50 °C, with humidity below 85% RH without condensation. Dimensions are 128 x 81 x 36 mm, for a weight of approximately 240 g.

Standards and safety. It complies with IEC 61010-1 and IEC 61010-2-032, CAT III 300 V, pollution degree 2. The clamp cannot be used for power measurement.

Typical uses. This model suits alternating current measurement with an instrument or recorder connected to the voltage output.

See all specifications

Highlights

  • Output voltage: AC 100mV/1000mA (AC 100mV/A)
  • Accessories: 9095 (Portable case), Instruction manual
  • Accuracy: ±1.0%rdg±0.1mV (50/60Hz) ±2.0%rdg±0.1mV (40Hz - 1kHz)
  • Applicable Standards: IEC 61010-1, IEC 61010-2-032, CAT III 300V pollution degree 2
  • Cable Length: Approx. 2m
  • Dimension: 128(L) x 81(W) x 36(D) mm

Good to know before integrating

  • Thermal: rated operating range 0 - 50º C, less than 85% RH (without condensation) — check it against the installation environment.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Similar products

All Clamp Meters
Request a quote