PSE-PM2 – Polarized reflection laser photoelectric sensor 2 m

Polarized reflection laser photoelectric sensor 2 m

General Industrial Sensors & Transmitters

  • ≤ 20mA
  • ≤ 100mA
  • ≤ 1000Hz
  • <20cm
Manufacturer part number
PSE-PM2
Manufacturer
Lanbao
Supply voltage
10...30 VDC, Ripple<10%Vp-p
Consumption Current
&le; 20mA

Lanbao PSE-PM2 polarized reflection laser photoelectric sensor with NPN or PNP NO+NC outputs and a 0.2 to 2 m range, for object detection in industrial automation.

Product overview

Overview. The Lanbao PSE-PM2 laser photoelectric sensor is a polarized reflection sensor using a Class 1 red laser source (650 nm). It detects objects over a rated range of 0.2 to 2 m, with a TD-24 reflector recommended for this range.

Main characteristics. The main light spot measures 4 mm at 2 m, with a minimum target of diameter 3 mm between 0 and 2 m and diameter 6 mm between 2 and 10 m. Distance is adjusted by knob. Response time is less than or equal to 0.5 ms on both switch-on and switch-off, and response frequency is less than or equal to 1000 Hz.

Outputs and connection. The sensor is available with NPN NO+NC or PNP NO+NC output, black line NO and white line NC. It connects through an M8 4-pin connector or a 2 m PVC cable. Load current is up to 100 mA and voltage drop is less than or equal to 1.5 V. Indicators show power in green, and output, overload or short circuit in yellow, flickering for the latter.

Power and environment. Supply voltage is 10 to 30 VDC with ripple below 10% Vp-p, and consumption is less than or equal to 20 mA. Built-in protections include short circuit, overload, reverse polarity and zener protection. The PC+ABS housing and PMMA optical elements give an IP67 protection degree. Operating temperature ranges from -10 °C to 50 °C, storage temperature from -40 °C to 70 °C, and humidity from 35% to 85%, without icing or condensation.

Compliance. The sensor is CE certified and complies with EN60947-5-2:2012 and IEC60947-5-2:2012.

Integration. This sensor fits industrial automation and control systems, to be wired to programmable logic controller inputs according to the chosen NPN or PNP output type. Available on quotation from Atlas Electronics.

See all specifications

Highlights

  • Supply voltage: 10...30 VDC, Ripple<10%Vp-p
  • Humidity range: 35%~85%(no icing, no condensation)
  • Bind zone: <20cm
  • Certification: CE
  • Connection: M8 4-pin connector/2m PVC cable
  • Detection method: Polarized reflection

Typical applications

Derived from the part category, not a compatibility statement.

Good to know before integrating

  • Power: plan for a supply compatible with 10...30 VDC, Ripple<10%Vp-p.
  • Thermal: rated operating range -10&ordm; C...50&ordm; C(no icing, no condensation) — check it against the installation environment.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote