PSE-PM8 – 8 m laser polarized reflection photoelectric sensor, NPN/PNP output

8 m laser polarized reflection photoelectric sensor, NPN/PNP output

General Industrial Sensors & Transmitters

  • ≤ 20mA
  • ≤ 100mA
  • ≤ 1000Hz
  • <20cm
Manufacturer part number
PSE-PM8
Manufacturer
Lanbao
Supply voltage
10...30 VDC, Ripple<10%Vp-p
Consumption Current
&le; 20mA

The Lanbao PSE-PM8 is a polarized reflection laser photoelectric sensor with a rated range of 2 to 8 m and NPN or PNP NO+NC outputs for object detection in industrial environments.

Product overview

Overview. The Lanbao PSE-PM8 is a polarized reflection photoelectric sensor from the PSE Little Square laser series. It detects objects with a class 1, 650 nm red laser beam producing a 16 mm light spot at 8 m, allowing precise positioning.

Main characteristics. Rated range of 2 to 8 m with the TD-09 reflector, minimum target diameter of 3 mm up to 2 m and 6 mm from 2 to 10 m, response frequency up to 1000 Hz, T-on and T-off response times at or below 0.5 ms. Distance adjustment by knob.

Outputs and connection. NPN or PNP outputs with NO+NC contacts (black wire NO, white wire NC), load current up to 100 mA, voltage drop at or below 1.5 V. M8 4-pin connector or 2 m PVC cable. Green indicator for power and yellow indicator for output, overload or short circuit.

Power and environment. Supply voltage 10 to 30 VDC with ripple below 10 % Vp-p, consumption at or below 20 mA. Protection against short circuit, overload, reverse polarity and zener surges. IP67 protection degree, operating temperature -10 °C to 50 °C, storage temperature -40 °C to 70 °C, humidity 35 % to 85 % without icing or condensation. PC+ABS housing, PMMA optical elements.

Typical uses. Presence and position detection of objects on conveyors and automated production lines where a narrow laser beam and an 8 m range are required.

Integration. Compliant with EN 60947-5-2:2012 and IEC 60947-5-2:2012, CE certified. Weight from 10 g to 50 g depending on version. Available on quotation from Atlas Electronics.

See all specifications

Highlights

  • Supply voltage: 10...30 VDC, Ripple<10%Vp-p
  • Humidity range: 35%~85%(no icing, no condensation)
  • Bind zone: <20cm
  • Certification: CE
  • Connection: M8 4-pin connector/2m PVC cable
  • Detection method: Polarized reflection

Typical applications

Derived from the part category, not a compatibility statement.

Good to know before integrating

  • Power: plan for a supply compatible with 10...30 VDC, Ripple<10%Vp-p.
  • Thermal: rated operating range -10&ordm; C...50&ordm; C(no icing, no condensation) — check it against the installation environment.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote