PSE-SC10 – PNP retro-reflective photoelectric sensor, small square format

PNP retro-reflective photoelectric sensor, small square format

General Industrial Sensors & Transmitters

  • < 20mA
  • 100mA
  • ﹣ 30...70 º C
  • CE
Manufacturer part number
PSE-SC10
Manufacturer
Lanbao
Supply voltage
10...30VDC(Ripple P-P:< 10%)
Consumption Current
< 20mA

PNP photoelectric sensor in a small square format with red light, for detecting objects from 0.3 to 10 cm. Suited to industrial automation applications.

Product overview

Lanbao PSE-SC10 photoelectric sensor. The Lanbao PSE-SC10 is a PNP-output photoelectric sensor from the PSE small square series, designed for object detection in industrial automation.

Main characteristics. Detection distance of 0.3 to 10 cm, 640 nm red light source, light spot of 7 × 70 mm at 100 mm, dead zone of 3 mm or less, return difference below 5 %, response time of 1 ms or less on switch-on and switch-off, and colour sensitivity of 90 % or more. The elongated spot allows stable detection of various holes in printed circuit boards. A 360° indicator shows the operating state, with a green power indicator and a yellow output indicator.

Connection and interfaces. The sensor is supplied with a 2 m PVC cable or an M8 4-pin connector. Load current reaches 100 mA, with a voltage drop of 1 V or less below 10 mA and 2 V or less below 100 mA.

Power and environment. Supply voltage of 10 to 30 VDC, ripple peak-to-peak below 10 %, consumption below 20 mA. Protected against short circuit, polarity reversal and overload. IP67 protection rating, operating temperature of −25 to 55 °C without condensation or icing, storage temperature of −30 to 70 °C.

Integration. Supplied with ZJP-8 mounting bracket, two screws and operation manual. CE certified. Weight of 50 g for the sensor and 10 g for the connector or cable.

See all specifications

Highlights

  • Supply voltage: 10...30VDC(Ripple P-P:< 10%)
  • Accessory: Mounting Bracket ZJP-8、Screws×2 Operation manual
  • Certification: CE
  • Connection Type: 2m PVC Cable/M8-4pin connector
  • Consumption Current: < 20mA
  • Detection Distance: 0.3-10cm

Typical applications

Derived from the part category, not a compatibility statement.

Good to know before integrating

  • Power: plan for a supply compatible with 10...30VDC(Ripple P-P:< 10%).
  • Thermal: rated operating range ﹣ 25...55 º C(No condensation、 No icing) — check it against the installation environment.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote