PSE-TM20 through-beam infrared photoelectric sensor from Lanbao, 20 m detection range, selectable NPN or PNP NO/NC outputs and IP67 protection for object detection.
Overview. The Lanbao PSE-TM20 is a through-beam photoelectric sensor from the PSE Little Square series, designed to detect opaque objects of at least 10 mm diameter.
Main characteristics. 20 m detection range, 850 nm infrared light source, direction angle greater than 2°, response time less than or equal to 1 ms, load current less than or equal to 200 mA and voltage drop less than or equal to 1 V. Distance and NO/NC mode are set with a push button, with status shown by green and yellow LEDs.
Interfaces and connectivity. Selectable NPN or PNP NO/NC output, connection by 2 m PVC cable or M8 connector depending on the version. Protected against short circuit, overload, reverse polarity and by zener diode.
Power and environment. Supply voltage 10 to 30 VDC, current consumption of 20 mA or less for the emitter and for the receiver. Operating temperature -25 to 55 °C, storage temperature -25 to 70 °C, IP67 protection degree. PC+ABS housing, PMMA filter, weight 50 g.
Typical uses. Presence detection and counting of objects on conveyors and automation lines, connected to a PLC or to a control input compatible with an NPN or PNP output.
Conformity. Compliant with EN60947-5-2:2012 and IEC60947-5-2:2012 standards, CE marking. Available on quotation from Atlas Electronics.
Short-circuit, overload, reverse polarity and zener protection
Connection
2m PVC cable/M8 connector
Consumption Current
Emitter: ≤ 20mA; Receiver: ≤ 20mA
Detection range
20m
Detection Type
Through beam
Direction angle
> 2°
Distance adjustment
Press the button for 2...5s, when the yellow and green light flash synchronously at 4Hz, and lift to finish the distance setting.; If the yellow and green light flash asynchronously @8Hz for 3s, setting fails and the product distance goes to the maximum.
In conformity with standards
CE
Indicator
Green light: power, stable signal (unstable signal flash); Yellow light: output, overload or short circuit (flash)
Light source
Infrared(850nm)
Load Current
≤ 200mA
Material
Housing: PC+ABS;Filter: PMMA
NO/NC adjustment
Press the button for 5...8s, when the yellow and green light flash synchronously at 2Hz, and lift. Finish state switch.
PSE-TM20 through-beam infrared photoelectric sensor from Lanbao, 20 m detection range, selectable NPN or PNP NO/NC outputs and IP67 protection for object detection.
Short-circuit, overload, reverse polarity and zener protection
Connection
2m PVC cable/M8 connector
Consumption Current
Emitter: ≤ 20mA; Receiver: ≤ 20mA
Detection range
20m
Detection Type
Through beam
Direction angle
> 2°
Distance adjustment
Press the button for 2...5s, when the yellow and green light flash synchronously at 4Hz, and lift to finish the distance setting.; If the yellow and green light flash asynchronously @8Hz for 3s, setting fails and the product distance goes to the maximum.
In conformity with standards
CE
Indicator
Green light: power, stable signal (unstable signal flash); Yellow light: output, overload or short circuit (flash)
Light source
Infrared(850nm)
Load Current
≤ 200mA
Material
Housing: PC+ABS;Filter: PMMA
NO/NC adjustment
Press the button for 5...8s, when the yellow and green light flash synchronously at 2Hz, and lift. Finish state switch.
Points to check before using PSE-TM20 in a design. They are derived from the recorded characteristics, not from the manufacturer's application circuits.
1Powerplan for a supply compatible with 10...30 VDC.
2Thermalrated operating range -25..55 º C — check it against the installation environment.
Power and communication
Supply voltage
10...30 VDC
Consumption Current
Emitter: ≤ 20mA; Receiver: ≤ 20mA
Load Current
≤ 200mA
Voltage drop
≤ 1V
Check the exact pin assignment and the application circuit in the datasheet, or ask our experts.
Implementation checklist
Power : plan for a supply compatible with 10...30 VDC.
Thermal : rated operating range -25..55 º C — check it against the installation environment.
Applications and use cases
Architectures in which PSE-TM20 can play a role, derived from its category. This is not a compatibility statement: check the specifications against your requirements.
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
Current productLanbao
PSE-TM20
Infrared through-beam photoelectric sensor 20 m range
What is recorded about the regulatory status and the life of this part.
Regulatory compliance
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details