The RAK6421 is a WisBlock HAT that connects WisBlock modules directly to a Raspberry Pi through the 40-pin header. This environmental starter kit targets temperature, humidity, pressure, VOC and UV measurement.
AIN0 to AIN3Description: Analog Input; Typ.: 3.3 V
ModelRAK6421
Simplifies hardware assemblyno extra adapters, no flying cables
Product overview
Overview. The RAKwireless RAK6421 is a WisBlock HAT for Raspberry Pi that connects WisBlock modules directly to the 40-pin header of the Raspberry Pi 4, Pi 5 or Pi Zero 2W, without an additional WisBlock baseboard. This variant, the Starter Kit Environment 1 (Basic), bundles the board with temperature, humidity, pressure, VOC and UV sensing modules plus an RTC.
Main characteristics. The board offers 2 WisBlock IO slots and 4 WisBlock Sensor slots, accepting RAK13300 and RAK13302 LoRa radios, I2C sensors, GPS and I2S audio. A built-in I²C ADC provides analog inputs AIN0 to AIN3, and an onboard EEPROM provides HAT+ compliance for hardware auto-discovery by the operating system.
Interfaces and connectivity. The pins expose I2C, SPI and UART buses, GPIO pins and analog inputs AIN0 to AIN3 at 3.3 V typical. Modules are powered with 3V3 and VBAT from the Pi's 5V rail.
Power and environment. The 5V supply comes from the Raspberry Pi, with a minimum of 4.9 V, typical 5.0 V and maximum 5.1 V. The 3V3 supply to modules is 3.3 V typical and VBAT is 4.17 V typical. The operating temperature range is -40 °C to +85 °C.
Typical uses. Sensor gateway, Meshtastic router or LoRa test platform, compatible with the RAK7391 WisGate Connect and the RAKR314 CM4 carrier board.
The RAK6421 is a WisBlock HAT that connects WisBlock modules directly to a Raspberry Pi through the 40-pin header. This environmental starter kit targets temperature, humidity, pressure, VOC and UV measurement.
AIN0 to AIN3Description: Analog Input; Typ.: 3.3 V
ModelRAK6421
Simplifies hardware assemblyno extra adapters, no flying cables
2. Datasheet extract (recorded values)
Parameter
Value
3V3
Description: 3V3 to WisBlock modules; Typ.: 3.3 V
5V
Description: Power supply from Raspberry Pi; Min.: 4.9 V; Typ.: 5.0 V; Max.: 5.1 V
Add-on options
Raspberry Pi, enclosure, and sensor bundles
AIN0 to AIN3
Description: Analog Input; Typ.: 3.3 V
Model
RAK6421
Operating Temperature
Description: Temperature Range; Min.: -40° C; Typ.: +25° C; Max.: +85° C
Description: VBAT to WisBlock modules; Typ.: 4.17 V
Applications and use cases
Architectures in which 110220 can play a role, derived from its category. This is not a compatibility statement: check the specifications against your requirements.
A proprietary PLC locks the project into one vendor’s tools. Industrial controllers built on the Raspberry Pi Compute Module run Linux, Node-RED, Python or CODESYS on DIN rail, with I/O modules, an operator panel and a cellular router for remote access
Adding a mobile connection to a product means choosing a modem, a SIM and a way to manage both. A cellular modem or HAT, an IoT SIM and a router or gateway form one connectivity chain, managed from a single platform
To check
Countries and networks where the devices will operate
Data volume per device and per month
Network technology (LTE-M, NB-IoT, 4G, 5G) supported by the modem and the SIM
Not every vision task justifies an industrial vision system. A Raspberry Pi with a camera module and an expansion board runs simple detection and counting models at low cost, close to the scene
To check
Frame rate and model size the board can run
Lighting and lens for the scene
Enclosure and cooling for the installation
Associated system blocks
ComputeCameras
Need a complete solution?
Send a request for 110220 and the other parts of your project.
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
Current productRAKwireless
110220
WisBlock HAT for Raspberry Pi, environmental sensor kit
What is recorded about the regulatory status and the life of this part.
Regulatory compliance
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details