RAK4270 – LoRaWAN sub-GHz module STM32L071 and SX1262 for EU433

LoRaWAN sub-GHz module STM32L071 and SX1262 for EU433

Sub-GHz Modules

  • -40°C to +85°C
  • 2.0 to 3.6V
  • EU433
  • UART/I2C/GPIO
Manufacturer part number
311007
Manufacturer
RAKwireless
Temperature range
-40°C to +85°C
Supply voltage
2.0 to 3.6V

The RAK4270 is a compact LoRaWAN module measuring 15 x 15.5 x 2.5 mm, EU433 frequency, designed for low-power long-range LoRa networks controlled by AT commands.

Product overview

RAK4270 RAKwireless module. sub-GHz LoRaWAN module from the Sub-GHz Modules range, EU433 frequency, variant with MHF connector and RF pinout disconnected.

Radio core. The module combines an STM32L071 microcontroller (32-bit Arm Cortex-M0+ core) with an SX1262 LoRa chip. It supports eight spreading factors, from SF5 to SF12, and a signal bandwidth between 7.8 kHz and 500 kHz, for a bit rate of 0.018 to 62.5 kb/s. Transmit output power reaches 21 dBm with 124 mA on PA_BOOST, and receive current is 15 mA.

Power consumption and supply. Typical standby current is 1.74 μA at 2.0 V for the EU868 band and 1.61 μA at 2.0 V for US915, with a typical value of 2.19 μA at 3.3 V for EU868. The supply voltage ranges from 2.0 to 3.6 V and the operating temperature range is -40°C to +85°C.

Interfaces and connectivity. The module provides a UART interface for AT commands, an I2C interface and GPIO pins. The programming pins SWDIO and SWCLK are exposed, along with the MCU reset MCU_NRST. The module has 20 stamp pads for board-to-board SMT soldering on a PCB.

Integration. The module is driven by an external controller through its AT commands, which control the module state as well as the LoRaWAN communication parameters and payloads. It complies with the LoRaWAN 1.0.2 protocol and can be used for LoRa networks or LoRa point-to-point communications. It is certified CE, FCC, KC, REACH and RoHS. Available on quotation from Atlas Electronics.

See all specifications

Highlights

  • Supply voltage: 2.0 to 3.6V
  • Certifications: CE, FCC, KC, REACH, RoHS
  • Compact Form Factor: 15 x 15.5 x 2.5 mm (LxWxH)
  • Fequency: EU433
  • I/O ports: UART/I2C/GPIO
  • Model: RAK4270

Typical applications

Derived from the part category, not a compatibility statement.

Good to know before integrating

  • Power: plan for a supply compatible with 2.0 to 3.6V.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Similar products

All Sub-GHz Modules
Request a quote