RAK4270 – Sub-GHz LoRaWAN Module 433 MHz with STM32L071 and SX1262

Sub-GHz LoRaWAN Module 433 MHz with STM32L071 and SX1262

Sub-GHz Modules

  • -40°C to +85°C
  • 2.0 to 3.6V
  • EU433
  • UART/I2C/GPIO
Manufacturer part number
311009
Manufacturer
RAKwireless
Temperature range
-40°C to +85°C
Supply voltage
2.0 to 3.6V

The RAK4270 is a sub-GHz LoRaWAN module from RAKwireless with an STM32L071 MCU and SX1262 chip, designed for low-power long-range links controlled by AT commands over UART.

Product overview

Overview. The RAKwireless RAK4270 is a sub-GHz LoRaWAN module, EU433 variant, integrating an STM32L071 microcontroller and an SX1262 LoRa chip. It is designed for long-range data acquisition on LoRaWAN 1.0.2 networks or in LoRa point-to-point links.

Main characteristics. The module supports 8 spreading factors (SF5 to SF12) and bandwidths from 7.8 kHz to 500 kHz, with a data rate of 0.018 to 62.5 kb/s. It offers a sensitivity of about -138 dBm in LoRa modulation and a maximum output power of 21 dBm (22 dB max on PA_BOOST). Its consumption is 2.31 µA typical at 3.3 V, falling to 1.61 µA at 2.0 V under the stated conditions.

Interfaces and connectivity. The module provides a UART interface for AT commands, an I2C interface and GPIO pins. The UART2_RX and UART2_TX pins carry the serial link to the external controller, and SWDIO and SWCLK allow programming. The form factor is 15 x 15.5 x 2.5 mm with a 20-pin SMT stamp pad for board soldering.

Power and environment. The supply voltage ranges from 2.0 to 3.6 V and the operating temperature range is -40 °C to +85 °C. The module is certified CE, FCC, KC, REACH and RoHS. The MHF variant is supplied, with the RF pin disconnected.

Typical uses. Given its low consumption and range, the module suits smart meters, logistics and supply chain tracking, agricultural sensors and smart city applications.

Integration. The host controller drives the module through its UART interface by sending AT commands, which manage the module state as well as the LoRaWAN parameters and payloads. A breakout board is available to simplify debugging connections.

See all specifications

Highlights

  • Supply voltage: 2.0 to 3.6V
  • Certifications: CE, FCC, KC, REACH, RoHS
  • Compact Form Factor: 15 x 15.5 x 2.5 mm (LxWxH)
  • Fequency: EU433
  • I/O ports: UART/I2C/GPIO
  • Model: RAK4270

Typical applications

Derived from the part category, not a compatibility statement.

Good to know before integrating

  • Power: plan for a supply compatible with 2.0 to 3.6V.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Similar products

All Sub-GHz Modules
Request a quote