RAK9003 – PoE power HAT for Raspberry Pi

PoE power HAT for Raspberry Pi

Raspberry Pi Expansion HATs & Shields

  • Ethernet
  • Power over Ethernet (PoE)
Manufacturer part number
610001
Manufacturer
RAKwireless

The RAK9003 is a Raspberry Pi form factor expansion board that powers the Raspberry Pi 3B+ or 4 over an Ethernet cable, in compliance with IEEE 802.3af/at.

Product overview

Overview. The RAKwireless RAK9003 PoE Pi HAT is an expansion board in Raspberry Pi form factor, compatible with the Raspberry Pi 3B+ and 4. It plugs directly onto the 40-pin header and powers the board through a CAT 5 Ethernet cable.

Main characteristics. The board conforms to IEEE 802.3af/at in mode A and mode B, with a maximum load of 25 W. Its signature and classification circuit makes it compatible with Class 0 to Class 4 equipment. The DC/DC converter accepts 42 V to 57 V input and delivers 5 V at 5 A, with 83% efficiency at 48 V input and 1.5 kV input-to-output isolation. Overload and short-circuit protection are built in.

Power and environment. The typical output voltage is 5.0 V, within a range of 4.9 V to 5.1 V. The module operates from -40 °C to +85 °C and is RoHS compliant.

ESD protection. ESD immunity of 4 kV contact discharge according to IEC 61000-4-2 for antenna ANT1, and ESD sensitivity of 1 kV for all pins according to the human body model JESD22-A114.

Typical uses. Powering a Raspberry Pi over a wired Ethernet network where a PoE infrastructure is available, without a separate power supply.

Typical applications

Derived from the part category, not a compatibility statement.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote