RAK8213 – NB-IoT Expansion Board for Raspberry Pi

NB-IoT Expansion Board for Raspberry Pi

Raspberry Pi Expansion HATs & Shields

  • NB-IoT
Manufacturer part number
610002
Manufacturer
RAKwireless

RAKwireless Pi HAT expansion board that hosts the RAK8213 NB-IoT BG96 module on the 40-pin connector of a Raspberry Pi. It suits evaluation and rapid prototyping.

Product overview

Overview. The RAK8213 Pi HAT from RAKwireless is an expansion board in Pi HAT form factor that works as a converter between the RAK8213 NB-IoT BG96 mPCIe module and the 40-pin header of a Raspberry Pi. It adds NB-IoT functionality to any Raspberry Pi.

Main characteristics. The board measures 65 x 55 x 18 mm (±2 mm) and weighs 22.6 g. It is supplied as the board only, without the RAK8213 module, and provides an mPCIe slot.

Interfaces and connectivity. Module signals are routed to the Raspberry Pi GPIO pins, including a UART link (TXD, RXD, RTS, CTS, DTR, DCD, RI), power-on control PWRKEY, reset RESET, airplane mode W_DISABLE, power saving indicator PSM and status indicator STATUS. A Micro-USB connector serves as both interface and power for the RAK8213.

Power. The board is powered at 5 V from the 5 V pins of the Raspberry Pi 40-pin connector. The GNSS_PWR_CTRL signal enables or disables the 3.3 V supply of an active GNSS antenna.

Typical uses. Evaluation of the RAK8213 module and rapid prototyping of NB-IoT communication solutions based on a Raspberry Pi.

Typical applications

Derived from the part category, not a compatibility statement.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote