LoRaWAN connectivity kit for Raspberry Pi with a RAK5146 SPI module including GPS and a Pi HAT, intended for IoT projects and rapid prototyping.
Frequency bandRU864
AsiaAS923
AustraliaAU915
ChinaCN470
DIDigital input
DODigital output
Product overview
RAKwireless RAK5146 Kit. The RAK5146 is a LoRaWAN gateway kit for Raspberry Pi, including a RAK5146 SPI module, a RAK5146/RAK2287 Pi HAT and the mounting accessories.
Main characteristics. The module is powered by Semtech's SX1303 baseband processor and is configured for the RU864 frequency band. The kit includes an MHF LoRa antenna and an MHF GPS antenna, the model being delivered with GPS.
Radio performance. Receiver sensitivity ranges from -123 dBm to -139 dBm depending on the spreading factor, which spans 7 to 12. Typical current consumption is 81.6 mA in receive mode and 512 mA in transmit mode at 3.3 V with a 27 dBm TX power.
Interfaces and connectivity. The module communicates with the host over an SPI bus (HOST_SCK, HOST_MISO, HOST_MOSI, HOST_CSN) and a UART link, and over a USB port (USB_DM, USB_DP) requiring a 90 Ω differential impedance. An I2C interface connects the ZOE-M8Q GPS module, whose time pulse output PPS is available.
Power and environment. The module runs from a 3.3 V DC supply with an operating input voltage between 3 V and 3.6 V. The normal operating temperature range extends from -40 °C to +85 °C. ESD protection of 1000 V (HBM and CDM) is provided.
Typical uses. This kit suits DIY IoT projects, rapid deployments and LoRaWAN prototyping on Raspberry Pi and other boards with the 40-pin connector.
Description: SPI interface; Condition: Input DC voltage at SPI interface pin; Min: -0.3 V; Max: 3.6 V
Tstg
Description: Storage temperature; Min: -40° C; Max: 85° C
USB
Description: USB D+/D- pins; Condition: Input DC voltage at USB interface pins; Min: -; Max: 3.6 V
Variant
With GPS
Applications and use cases
Architectures in which 813017 can play a role, derived from its category. This is not a compatibility statement: check the specifications against your requirements.
A proprietary PLC locks the project into one vendor’s tools. Industrial controllers built on the Raspberry Pi Compute Module run Linux, Node-RED, Python or CODESYS on DIN rail, with I/O modules, an operator panel and a cellular router for remote access
Adding a mobile connection to a product means choosing a modem, a SIM and a way to manage both. A cellular modem or HAT, an IoT SIM and a router or gateway form one connectivity chain, managed from a single platform
To check
Countries and networks where the devices will operate
Data volume per device and per month
Network technology (LTE-M, NB-IoT, 4G, 5G) supported by the modem and the SIM
Not every vision task justifies an industrial vision system. A Raspberry Pi with a camera module and an expansion board runs simple detection and counting models at low cost, close to the scene
To check
Frame rate and model size the board can run
Lighting and lens for the scene
Enclosure and cooling for the installation
Associated system blocks
ComputeCameras
Need a complete solution?
Send a request for 813017 and the other parts of your project.
Answers to the questions that the recorded characteristics of 813017 can answer. A question is not asked when nothing is recorded to answer it.
1Does it support SPI?
Yes — recorded under "SPI": Description: SPI interface; Condition: Input DC voltage at SPI interface pin; Min: -0.3 V; Max: 3.6 V.
2Does it include GNSS/GPS?
Yes — recorded under "GPS_PPS": Description: GPS 1 PPS input; Condition: Input DC voltage at GPS_PPS input pin; Min: -0.3 V; Max: 3.6 V.
3Does it have a USB interface?
Yes — recorded under "USB": Description: USB D+/D- pins; Condition: Input DC voltage at USB interface pins; Min: -; Max: 3.6 V.
4What is the operating temperature range?
Min: -40° C; Typical: +25° C; Max: +85° C; Remarks: Normal operating temperature range (fully functional and meet 3GPP specifications) (source: Normal operating temperature).
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
What is recorded about the regulatory status and the life of this part.
Regulatory compliance
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details