| Current consumption | 4.8 mA in Tx, 4.6 mA in Rx, and 1.5 uA in Sleep Mode |
| Response time | Conditions: τ 63%; Value: < 5 to 30; Units: s |
| Accuracy | Conditions: Typ; Value: ±2.0; Units: ° C |
| Amplifier Gain | Normal Temp.: 27 dB ± 2.0; High Temp.: 27 dB ± 2.0; Low Temp.: 27 dB ± 2.0 |
| Antenna Type | PCB |
| Axial Ratio (dB) w/ 70 mm2 GND Plane | Specifications: 3.0; PET: ±0.2 |
| Bandwidth (MHz) (Return Loss ≤ -10 dB) | Specifications: ≥10; PET: ±0.5 |
| BG95-M3_AP READY | P0.30 |
| BG95-M3_CTS | P0.11 |
| BG95-M3_DTR | P0.26 |
| BG95-M3_PSM | P0.03 |
| BG95-M3_PWRKEY | P0.02 |
| BG95-M3_RESET | P0.28 |
| BG95-M3_RI | P0.27 |
| BG95-M3_RTS | P0.07 |
| BG95-M3_STATUS | P0.31 |
| BG95-M3_WDISABLE | P0.29 |
| BLE Data Rate | 2 Mbps, 1 Mbps, 500 Kbps, 125 Kbps |
| BLE Protocol | BLE 5.0 |
| BLE Rx Sensitivity | 95 dBm @ 1 Mbps BLE mode |
| BLE transmits @ 0 dBm, the BG95-M3 is in power saving mode | 7 mA |
| BLE Tx Power | 8 dBm max |
| 🔵 BLUE LED | Connection: connect to the BG95-M3; Function: Indicates the status of the BG95-M3 |
| Capacity | As required |
| Cat M1 & NB1 : | GSM: -; Rx-Diversity: -; GNSS: - |
| Cell efficiency | 17.5% |
| Center Frequency (MHz) w/ 30 mm2 GND plane | Specifications: 1575.42; PET: ±3.0 |
| Charging current | 500 mA |
| Charging voltage | 4.5-5.5 V |
| CPU | ARM® Cortex®-M4 32-bit processor with FPU, 64 MHz |
| Current at nominal power | 80mA (±5%) |
| DC Current | 10 mA |
| DC voltage | 3 ~ 5 V |
| Discharge current | 2 A |
| Enclosure Dimensions | 150mm x 90mm x 90mm |
| Enclosure Weight | 0.5kg |
| ESD | 2000 |
| Extended Temp. Range | Min: -40° C; Typical: +25° C; Max: +80° C |
| Flash | 1 MB |
| Frequency Range | 1575.42 MHz |
| Frequency Temperature Coefficient (ppm/ºC) | Specifications: 0±10; PET: - |
| FS | Parameter: Measurement Range; Test Condition: FS bit set to 00; Typ.: ±2.0; Unit: g; Test Condition: FS bit set to 01; Typ.: ±4.0; Unit: g; Test Condition: FS bit set to 10; Typ.: ±8.0; Unit: g; Test Condition: FS bit set to 11; Typ.: ±16.0; Unit: g |
| Gain | 1.0 |
| Gain (Zenith) (dBi Typ.) w/ 70 mm2 GND Plane | Specifications: 4.5; PET: ±0.5 |
| 🟢 GREEN LED | Connection: connected to the nRF52840; Function: Defined by the user |
| GSM Features | GPRS :; - Supports GPRS multi-slot class 33 (by default); - Coding scheme: CS-1, CS-2, CS-3, and CS-4 Max. 107 Kbps (DL), Max. 85.6 Kbps (UL); EDGE :; - Supports Edge multi-slot class 33 (by default); - Supports GMSK and 8-PSK for different MCS Downlink; - Coding Schemes: CS 1-4 and MCS 1-9 Uplink Coding Schemes: CS 1-4 and MCS 1-9 Max. 296 Kbps (DL), 236.8 Kbps (UL) |
| Humidity | 45-95% |
| Hysteresis | Conditions: -; Value: ±1; Units: %RH |
| Impedance | 50 |
| IOs of BG95-M3, nRF52840 - J10 and J12 | -0.3 -VREF |
| IOs of J-link (J9) | -0.3 - 1.9 |
| Long-term Drift | Conditions: Typ.; Value: < 0.2; Units: ° C/y |
| LTE-FDD: B1/B2/B3/B4/ B5/B8/B12/B13/B18/ B19/B20/B26/B28 | GSM: GSM850/GSM900; Rx-Diversity: Not Supported; GNSS: GPS, GLONASS, BeiDou/ Compass, Galileo, QZSS |
| LTE Features | - Supports LTE Cat M1 and LTE Cat NB1; - Supports 1.4 MHz RF bandwidth for LTE Cat M1; - Supports 200 kHz RF bandwidth for LTE Cat NB1; - Supports SISO in the DL direction Cat M1: Max. 300 Kbps (DL)/375 Kbps (UL) Cat NB1: Max. 32 Kbps (DL)/70 Kbps (UL) |
| Metal Plate | RAK5010 |
| Model | RAK5010 |
| Noise Coefficient | ≤ 2.0 dB |
| Operational Temp. Range | Min: -35° C; Typical: +25° C; Max: +75° C |
| Panel Dimensions | 60mm x 60mm x 2mm |
| Polarization | Linear |
| Power supply | Supply Voltage: 3.3 V – 4.3 V Typical supply voltage: 3.8 V |
| RAM | 256 KB |
| Range of Frequency | 806-960/1710-2700 MHz |
| Range of Receiving Frequency | Specifications: 1575.42±1.1; PET: ±2.5 |
| 🔴 RED LED | Connection: connect to the BG95-M3; Function: Indicates the network status of the BG95-M3 |
| Repeatability | Conditions: -; Value: 0.1; Units: ° C |
| Resolution | Conditions: -; Value: 0.01; Units: ° C |
| RX of UART | P0.06 (TX for the nRF52840) |
| Specified Range | Conditions: -; Value: -40 to +125; Units: ° C |
| Standard voltage | 3.7 V |
| Storage | Temperature: 40° C ~ +85° C; Humidity: 0% ~ 95% |
| Storage Temp. Range | Min: -40° C; Typical: +25° C; Max: +80° C |
| The nRF52840 is in sleep mode, the BG95-M3 is in power saving mode | 13 µA |
| The nRF52840 is Running, the BG95-M3 transmits data @ NB1, 23 dBm | 200 mA |
| Tolerance | Conditions: Max; Value: See Figure 2; Units: ° C |
| Transmitting Power | - Class: 3 (23 dBm ± 2 dB) for LTE-FDD bands; - Class: 3 (23 dBm ± 2 dB) for LTE-TDD bands; - Class: 4 (33 dBm ± 2 dB) for GSM850; Class: 4 (33 dBm ± 2 dB) for GSM900; - Class: 1 (30 dBm ± 2 dB) for DCS1800; Class: 1 (30 dBm ± 2 dB) for PCS1900; Class: E2 (27 dBm ± 3 dB) for GSM850 8-PSK; Class: E2 (27 dBm ± 3 dB) for GSM900 8-PSK; Class: E2 (26 dBm ± 3 dB) for DCS1800 8-PSK; Class: E2 (26 dBm ± 3 dB) for PCS1900 8-PSK |
| TX of UART | P0.08 (RX for the nRF52840) |
| Variant | With Solar Panel |
| Vbat, battery voltage | -0.3 - 4.3 |
| Vbus, power supply on UBS port | -0.3 - 5.5 |
| Vconn solar panel voltage | -0.3 - 5.5 |
| Voltage at nominal power | 5V (±10%) |
| VSWR | ≤1.5 |
| VSWR (in Center Frequency) | Specifications: ≤1.5; PET: ±0.5 |
| Wireless technologies | LoRa |
| Working | Temperature: -40° C ~ +75° C; Humidity: 0% ~ 95% |