Limited record: this part has neither specifications nor a datasheet in the catalog yet. It is shown for reference and is not indexed.

RS-GZ-N01-XD – Light Sensor LoRaWAN and NB-IoT for Indoor Use

Light Sensor LoRaWAN and NB-IoT for Indoor Use

Environmental Sensor Nodes

  • NB-IoT
  • LoRaWAN
  • RS-485
Manufacturer part number
C14016
Manufacturer
RAKwireless

RAKwireless RS-GZ-N01-XD light sensor for indoor light intensity monitoring, with LoRaWAN or NB-IoT communication and an RS485 Modbus-RTU interface.

Product overview

RAKwireless. The Sensor Hub Light Sensing, reference C14016, is a light intensity sensor in the environmental sensor node family, designed for applications where light intensity monitoring is essential. It is offered in the LoRaWAN+NB IoT variant for the IN865 frequency band.

Main characteristics. The light measurement range is 0 to 65535 Lux, with a precision of ±7% at 25 °C. The sensor also measures humidity, from 0% to 80% RH, with a precision of ±3% RH at 60% RH and 25 °C, and temperature, from -40 °C to +60 °C, with a precision of ±0.5 °C at 25 °C. The maximum power consumption is 0.4 W.

Interfaces and connectivity. The sensor uses RS485 communication with the standard Modbus-RTU protocol, with a configurable communication address and baud rate. The longest communication distance is 2000 m. Wireless communication is available over LoRaWAN and NB-IoT, the NB-IoT module supporting the LTE categories CAT M1 and CAT NB2.

Power and environment. The sensor is powered from a 10 to 30 V DC wide voltage supply. An external DC power supply and a solar panel power source are available as options. The casing is rigid and robust, and the sensor is designed for ceiling-mounted installation.

Typical uses. The sensor is mainly used in laboratories, archives and electronic equipment production lines. Its Modbus-RTU interface allows integration into a supervision system.

Integration. The Sensor Hub can connect several sensor probes and probe IOs through a splitter cable, and the distance between the Sensor Hub and a probe can be extended with an extension cable. A Sensor Hub with a probe IO and connected sensor cannot be battery-powered and must use the supplied power supply.

Typical applications

Derived from the part category, not a compatibility statement.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote