Limited record: this part has neither specifications nor a datasheet in the catalog yet. It is shown for reference and is not indexed.

SenseCAP S200 – Ultrasonic wind speed and direction sensor with RS485

Ultrasonic wind speed and direction sensor with RS485

Environmental Sensor Nodes

Manufacturer part number
S200
Manufacturer
Seeed Studio

Ultrasonic wind speed and direction sensor with no moving parts, designed for outdoor weather monitoring in applications such as agriculture and smart cities.

Product overview

Seeed Studio S200. The Seeed Studio S200 is an ultrasonic wind speed and direction sensor with no moving parts, designed for outdoor measurement.

Measurements. The sensor measures wind speed over a 0 to 60 m/s standard range, extended to 0 to 75 m/s, and withstands up to 80 m/s, with an accuracy of ±0.3 m/s up to 10 m/s and a resolution of 0.1 m/s. Wind direction covers 0 to 360° with an accuracy of ±3.0° and a resolution of 0.1°.

Main characteristics. The sensor comes with a 3 m cable for pole mounting. Its dimensions are 140 x 140 x 320 mm and its weight is 1470 g.

Interfaces and connectivity. The S200 provides an RS-485 output with Modbus-RTU or SDI-12 protocol, through an M12 connector. It can be connected to any data logger that supports RS485 (MODBUS-RTU) or SDI-12.

Power and environment. The sensor operates on 12 V to 24 V, with a separate 24 V heating power supply. Its power consumption is 0.4 W, rising to 21 W with heating. It operates from -40 °C to +85 °C at 0 to 100 %RH humidity, with an IP66 protection rating.

Typical uses. The S200 suits outdoor weather monitoring, notably agriculture and smart cities, with a Modbus output compatible with PLCs and data loggers.

Typical applications

Derived from the part category, not a compatibility statement.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote