SenseCAP S700 V2 – Compact 7-in-1 Outdoor Weather Sensor

Compact 7-in-1 Outdoor Weather Sensor

Environmental Sensor Nodes

  • - 40 °C ~ + 85 °C
  • 0-360°
  • M12 connector
  • 0.4W; heating 21W
Manufacturer part number
S700
Manufacturer
Seeed Studio
Operating temp. & humidity
-40°C to +85°C; 0-100%RH
Range
- 40 °C ~ + 85 °C

The S700 compact weather sensor from Seeed Studio measures seven environmental parameters in one IP66 housing, for outdoor weather monitoring, agriculture and smart city applications.

Product overview

Overview. The Seeed Studio SenseCAP S700 V2 weather sensor, model S700, is a compact 7-in-1 weather sensor that integrates air temperature, relative humidity, barometric pressure, light intensity, precipitation, wind speed and wind direction in a single device.

Main characteristics. Air temperature from -40 °C to +85 °C with an accuracy of ±0.1 °C and a resolution of 0.01 °C. Relative humidity from 0 to 100 %RH, accuracy ±1.5 %RH. Barometric pressure from 300 to 1250 hPa, accuracy ±50 Pa. Wind speed from 0 to 60 m/s standard, accuracy ±0.3 m/s up to 10 m/s, extended to 75 m/s, withstanding up to 80 m/s. Wind direction from 0 to 360°, accuracy ±3.0°. The ultrasonic wind sensor has no moving parts.

Interfaces and connectivity. RS485 (MODBUS-RTU) and SDI-12 outputs, M12 8-pin connector, 3 m cable supplied. A USB Type-C interface is used for device configuration.

Power and environment. Power supply of 12 V to 24 V, with a separate 24 V heating power supply for use in extremely cold environments. Power consumption 0.4 W, 21 W with heating. IP66 protection rating, operating range -40 °C to +85 °C and 0 to 100 %RH. Dimensions 140 x 140 x 320 mm, weight 1470 g.

Typical uses. Outdoor weather monitoring, smart agriculture, smart cities, power transmission and renewable energy. Thanks to the RS485 Modbus-RTU output, the sensor can be connected to any compatible data logger or controller, or transmit its data to LoRaWAN servers when paired with a compatible data logger.

Integration. The kit includes the sensor, an M12 8-pin communication cable, a USB Type-C cable, six screws and a flat washer to open the configuration port. A waterproof aviation connector is available as an option for use with the SenseCAP SensorHub datalogger.

See all specifications

Highlights

  • IP rating: IP66
  • Accuracy: ± 0.1℃
  • Applications: Agriculture, smart cities, outdoor monitoring
  • Cable Length: 3m
  • Device weight: 2kg
  • Dimension: 140 x 140 x 320mm

Typical applications

Derived from the part category, not a compatibility statement.

Good to know before integrating

  • Thermal: rated operating range -40°C to +85°C; 0-100%RH — check it against the installation environment.
  • Thermal: rated operating range -40 °C ~ + 85 °C, 0 ~ 100%RH — check it against the installation environment.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote