The SunFounder RPI005 Sense HAT is an expansion board that attaches to the 40 GPIO pins of a Raspberry Pi and combines orientation, pressure, humidity and temperature sensors with an 8x8 LED display and a joystick.
Product overview
SunFounder RPI005 expansion board. The SunFounder RPI005 Sense HAT is an expansion board for Raspberry Pi 3, 2, B+ and A+, attached to the 40 GPIO pins of the Raspberry Pi. It integrates several integrated circuit-based sensors for experiments, applications and games. Sensors — Gyroscope angular rate sensor of +/-245/500/2000dps, accelerometer linear acceleration sensor of +/-2/4/8/16 g, magnetometer of +/- 4/8/12/16 gauss, barometer with a 260 to 1260 hPa absolute range and +/- 0.1 hPa accuracy under normal conditions, temperature sensor accurate to +/- 2 degC in the 0-65 degC range, and relative humidity sensor accurate to +/- 4.5% in the 20-80%rH range and to +/- 0.5 degC in the 15-40 degC range. Display and control — 8x8 LED matrix to display sensor data, and a small 5-button joystick for user interaction with running programs. Typical uses — Measuring orientation (yaw, pitch and roll), showing geomagnetic north with the magnetometer, or games such as Tetris, Pong and Snake. Integration — Programmed in Python with a dedicated library. Package contents — One Sense HAT board, four mounting screws and four nylon standoffs.
The SunFounder RPI005 Sense HAT is an expansion board that attaches to the 40 GPIO pins of a Raspberry Pi and combines orientation, pressure, humidity and temperature sensors with an 8x8 LED display and a joystick.
Gyroscope – angular rate sensor+/-245/500/2000dps
Magnetometer - Magnetic Sensor+/- 4/8/12/16 gauss
2. Datasheet extract (recorded values)
Parameter
Value
Barometer
260 – 1260 hPa absolute range (accuracy depends on the temperature and pressure, +/- 0.1 hPa under normal conditions)
Gyroscope – angular rate sensor
+/-245/500/2000dps
Magnetometer - Magnetic Sensor
+/- 4/8/12/16 gauss
Applications and use cases
Architectures in which RPI005 can play a role, derived from its category. This is not a compatibility statement: check the specifications against your requirements.
A proprietary PLC locks the project into one vendor’s tools. Industrial controllers built on the Raspberry Pi Compute Module run Linux, Node-RED, Python or CODESYS on DIN rail, with I/O modules, an operator panel and a cellular router for remote access
Adding a mobile connection to a product means choosing a modem, a SIM and a way to manage both. A cellular modem or HAT, an IoT SIM and a router or gateway form one connectivity chain, managed from a single platform
To check
Countries and networks where the devices will operate
Data volume per device and per month
Network technology (LTE-M, NB-IoT, 4G, 5G) supported by the modem and the SIM
Not every vision task justifies an industrial vision system. A Raspberry Pi with a camera module and an expansion board runs simple detection and counting models at low cost, close to the scene
To check
Frame rate and model size the board can run
Lighting and lens for the scene
Enclosure and cooling for the installation
Associated system blocks
ComputeCameras
Need a complete solution?
Send a request for RPI005 and the other parts of your project.
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
What is recorded about the regulatory status and the life of this part.
Regulatory compliance
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details