Limited record: this part has neither specifications nor a datasheet in the catalog yet. It is shown for reference and is not indexed.

SUP-DO7018 – Optical dissolved oxygen sensor with RS-485 output

Optical dissolved oxygen sensor with RS-485 output

Oxygen Sensors

  • RS-485
  • Modbus
Manufacturer part number
00529
Manufacturer
Supmea

Supmea SUP-DO7018 fluorescence-based optical dissolved oxygen sensor with Modbus RS-485 output, designed for water quality monitoring. It provides automatic temperature compensation.

Product overview

Overview. The Supmea SUP-DO7018 is an optical dissolved oxygen sensor based on fluorescence, designed for continuous measurement of dissolved oxygen in water. It uses a new generation fluorescence lifetime technology and does not consume oxygen.

Main characteristics. The sensor measures dissolved oxygen from 0 to 20 mg/L or 0 to 200% saturation, and temperature from 0 to 50 °C. Accuracy is ±0.3 mg/L for dissolved oxygen and ±0.2 °C for temperature. It requires no membrane, no electrolyte and no calibration, and is not affected by hydrogen sulfide interference. The built-in temperature sensor provides automatic temperature compensation.

Interfaces and connectivity. The output is a Modbus RS-485 signal, allowing networking without a dedicated controller.

Power and environment. The power supply is 5 to 24 VDC with a current below 50 mA. The sensor has an IP68 ingress protection rating, a maximum water depth of 10 m and an operating temperature range of 0 to 50 °C. The sensor material is titanium alloy. Cable lengths of 5 m, 10 m, 15 m or 30 m are available. The fluorescent cap has a life of one year under normal use.

Typical uses. With its Modbus RS-485 output, the SUP-DO7018 can be connected to a programmable logic controller or a supervision system for water quality monitoring.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Similar products

All Oxygen Sensors
Request a quote