USR IoT USR-N510. The USR-N510 serial port server is a 1-port serial to Ethernet device server providing transparent bidirectional transmission between an RS232, RS422 or RS485 device and a TCP/IP network.
Main characteristics. Cortex-M4 processor at 120 MHz, 512 KB flash memory, baud rates from 600 bps to 230.4 Kbps, 5 to 8 data bits, 1 or 2 stop bits, parity none, even, odd, space and mark, and XON/XOFF software flow control. Send and receive buffers of 2 KB each, with a receive buffer of up to 16 KB.
Interfaces and connectivity. Three-in-one RS232/RS485/RS422 serial port with TX/RX and CTS/RTS signals for RS232 and A/B/G signals for RS485, 2.2 KΩ pull-up and pull-down resistors for RS485. 8-pin RJ45 connector, 10/100 Mbps Ethernet with automatic MDI/MDIX. Network protocols IP, TCP, UDP, DHCP, DNS, HTTP, ARP, ICMP, WebSocket and HTTP client. Work modes TCP server, TCP client, UDP server, UDP client and HTTPD client.
Modbus gateway. Bidirectional Modbus TCP to Modbus RTU conversion and Modbus polling, for exchanging data with PLCs and field devices.
Power and environment. DC power input from 5 to 36 V via terminal block, power consumption below 1 W, operating current of 53 mA at 12 V. Operating temperature range -40 to 85 °C and storage temperature -40 to 85 °C, 5 to 95% RH without condensation. Surge protection, ESD 2 kV and 2 kV electromagnetic isolation. Dimensions 88 x 81 x 24 mm.
Typical uses. Industrial data transmission and industrial automation, building and power monitoring, telecom room monitoring, configuration through the built-in web page, setup software or serial commands, and virtual COM port USR-VCOM under Windows.