USR-N540 – 4-port Serial to IP Converter RS-232/RS-422/RS-485

4-port Serial to IP Converter RS-232/RS-422/RS-485

Serial-to-Ethernet Device Servers (RS-232/422/485)

  • -40 ~ 85°C (industry)
  • 8 pin RJ45
  • DC 5 ~ 36V
  • 53mA @ 12V
Manufacturer part number
N540
Manufacturer
USR IoT
Operating temperature
-40 ~ 85°C (industry)
Interface Standard
8 pin RJ45

The USR-N540 from USR IoT is a 4-port serial to Ethernet device server providing bi-directional transparent transmission between RS-232, RS-422 or RS-485 equipment and an IP network.

Product overview

USR IoT USR-N540. The USR-N540 is a 4-port serial to IP converter (Ethernet serial port device server) providing bi-directional transparent transmission between RS-232, RS-422 or RS-485 links and an IP network.

Main characteristics. Each of the 4 ports can work as RS-232, RS-485 or RS-422, and these modes can operate at the same time. The baud rate ranges from 600 bps to 230.4 Kbps, with 5 to 8 data bits, 1 or 2 stop bits and None, Even, Odd, Space and Mark parity. The processor is a Cortex-M4 running at 120 MHz, with 512K byte of flash and 2k bytes each of send and receive buffer, the receive buffer reaching up to 16k bytes.

Interfaces and connectivity. The interfaces are 8-pin RJ45 connectors. Ethernet runs at 10/100 Mbps with MDI/MDIX auto switching between cross and direct connection. Supported network protocols are IP, TCP, UDP, DHCP, DNS, HTTPS, ARP, ICMP, WebSocket and the httpsD client. Operating modes include TCP server, TCP client, UDP, httpsD client and WebSocket. RTS/CTS and XON/XOFF flow control are supported, and configuration is possible through a built-in webpage, computer set-up software or serial commands. Virtual serial software (USR-VCOM) is available for Windows 2000 or higher, 32 bit and 64 bit.

Power and environment. The power supply is DC 5 to 36 V with reverse-polarity protection, for a consumption below 1 W (53 mA at 12 V). It is rated for an operating temperature of -40 to 85 °C and a storage temperature of -40 to 85 °C, 5 to 95% RH (no condensation). It provides 2 kV electromagnetic isolation and is certified CE, FCC and ROHS.

Typical uses. The converter allows PLCs, sensors or instruments fitted with RS-232, RS-422 or RS-485 serial ports to be connected to an Ethernet network, for example for data collection or Modbus transfers. An RS-485 port can be fitted with a 2.2 KΩ pull-up and pull-down resistor.

Integration. Dimensions are 222 x 122 x 29 mm, shell and terminals included. Depending on the reference, the 4 ports are offered as RS-232/485/422 or RS-485 only, and the model is also available with 1, 2 or 8 ports in the N5x0 H7 range.

See all specifications

Highlights

  • Operating temperature: -40 ~ 85°C (industry)
  • Basic Frequency: 120MHz
  • Baud rate: 600bps ~ 230.4Kbps
  • Buffer: Send and receive 2k bytes respectively
  • Certificate: CE,FCC,ROHS
  • Check Bit: None,Even,Odd,Space,Mark

Typical applications

Derived from the part category, not a compatibility statement.

Good to know before integrating

  • Thermal: rated operating range -40 ~ 85°C (industry) — check it against the installation environment.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote