USR-TCP232 – RS-232/RS-485 to Ethernet serial device server Cortex-M4

RS-232/RS-485 to Ethernet serial device server Cortex-M4

Serial-to-Ethernet Device Servers (RS-232/422/485)

  • -40 ~ 85°C
  • Power interface
  • RJ45
  • DC 5 ~ 36V
Manufacturer part number
USR-TCP232
Manufacturer
USR IoT
Operating temperature
-40 ~ 85°C
Interface
Power interface

USR-TCP232 serial device server from USR IoT, connecting one RS-232 and one RS-485 port to a 10/100 Mbps Ethernet network for monitoring and control of serial equipment.

Product overview

USR IoT USR-TCP232. RS-232/RS-485 to Ethernet serial device server for connecting serial equipment to a TCP/IP network. Main characteristics — The device has 2 serial ports, 1 RS-232 and 1 RS-485, usable at the same time, with baud rates from 600 bps to 230 kbps on RS-232 and from 600 bps to 1 Mbps on RS-485. Data bits (5 to 8), stop bits (1 or 2) and parity (none, even, odd, space, mark) are configurable, along with XON/XOFF software flow control. A 2 kB buffer is provided for both sending and receiving. Interfaces and connectivity — The RJ45 Ethernet port provides a 10/100 Mbps MDI/MDIX link with automatic switching between straight and crossover cable. The network topology is star. The device supports TCP server, TCP client, UDP server, UDP client and HTTPSD client modes, along with IP, TCP, UDP, DHCP, DNS, HTTPS, ARP, ICMP and WebSocket protocols. A bidirectional Modbus TCP to Modbus RTU gateway with Modbus polling is built in, as is the USR-VCOM virtual serial port software for Windows. Configuration is possible through the built-in web page, computer set-up software or serial commands. Power and environment — Power is supplied at 5 to 36 V DC through a terminal block, for consumption below 1 W. The device operates from -40 to 85 °C and stores from -45 to 105 °C, at 5 to 95 % relative humidity. It is protected against surges and 2 kV ESD, with 2 kV electromagnetic isolation. It is based on a Cortex-M4 processor running at 120 MHz. Typical uses — This gateway allows devices with an RS-485 serial port, such as PLCs or instruments, to be connected to an Ethernet network through the Modbus TCP to Modbus RTU mode, enabling remote supervision of equipment. Dimensions 80 x 62 x 24 mm. Available on quotation from Atlas Electronics.

See all specifications

Highlights

  • Operating temperature: -40 ~ 85°C
  • Accessory: 5V1A high-quality power supply, serial line, cable
  • Basic Frequency: 120MHz
  • Baud rate: RS-232: 600 bps ~ 230K bps, RS-485: 600 bps ~ 1M bps
  • Buffer: Send and receive 2k bytes respectively
  • Built-in web page: Customized web page is acceptable

Typical applications

Derived from the part category, not a compatibility statement.

Good to know before integrating

  • Thermal: rated operating range -40 ~ 85°C — check it against the installation environment.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote