Limited record: this part has neither specifications nor a datasheet in the catalog yet. It is shown for reference and is not indexed.

DFR0117 – 32KB I2C EEPROM Memory Module for Arduino

32KB I2C EEPROM Memory Module for Arduino

DFRobot Gravity Sensor & Actuator System

Manufacturer part number
DFR0117
Manufacturer
DFRobot

I2C EEPROM data storage module offering 32KB of extra memory for Arduino UNO and Leonardo boards, with a solderless Gravity connector.

Product overview

Overview. The DFRobot DFR0117 Gravity I2C EEPROM data storage module is a 32KB memory module designed for Arduino UNO and Leonardo boards, which have limited built-in storage. It provides additional capacity for your project data.

Main characteristics. EEPROM organised as 32K x 8 (256 Kbit), with Arduino read/write routines. Read current of 400 uA max. at 5.5V, 400 kHz, standby current of 1 uA max. at 3.6V (I-temp). Dimensions 30.00 x 21.05 mm, mounting hole diameter 3.5 mm, weight 10 g.

Interfaces and connectivity. I2C protocol, 2-wire serial interface. Eight selectable I2C addresses via a DIP switch, allowing multiple modules to be connected and address conflicts with other I2C devices to be avoided. Gravity connector for solderless connection, with I2C/UART sensor cable supplied.

Power and environment. Power supply from 2.5V to 5.5V, low-power CMOS technology. Ambient operating temperature with power applied from -40℃ to +125℃.

Typical uses. Storage of measurement data, configuration parameters or logs for prototypes and embedded projects built with Arduino.

Integration. The module connects directly to the I2C bus of the Arduino board through the Gravity connector. Its eight addresses allow several modules to be added to increase storage capacity.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote